Packages changed: Mesa Mesa-drivers gnutls (3.7.5 -> 3.7.4) kdsoap logrotate (3.19.0 -> 3.20.1) podman python-psutil (5.9.0 -> 5.9.1) qemu wayland xwayland (22.1.1 -> 22.1.2) === Details === ==== Mesa ==== Subpackages: Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - buildrequire DirectX-Headers only on %{ix86} x86_64, since it's only relevant on these platforms - Calling patch with '-p1' (as the others are) so 'git show' .patch output works. - Generating 'n_stop-iris-flicker.patch' from 'git format-patch' vs. a standard diff. - Fixing up 'stop-iris-flicker.patch' patch name to follow standards. ==== Mesa-drivers ==== Subpackages: Mesa-dri Mesa-gallium - buildrequire DirectX-Headers only on %{ix86} x86_64, since it's only relevant on these platforms - Calling patch with '-p1' (as the others are) so 'git show' .patch output works. - Generating 'n_stop-iris-flicker.patch' from 'git format-patch' vs. a standard diff. - Fixing up 'stop-iris-flicker.patch' patch name to follow standards. ==== gnutls ==== Version update (3.7.5 -> 3.7.4) - disable kcapi usage for now, as kernel-obs-build not adjusted to contain the algorithms. bsc#1189283 - FIPS: Additional PBKDF2 requirements for KAT [bsc#1184669] * The IG 10.3.A and SP800-132 require some minimum parameters for the salt length, password length and iteration count. These parameters should be also used in the KAT. * Add gnutls-FIPS-PBKDF2-KAT-requirements.patch - Enable to run the regression tests also in FIPS mode. - Update to 3.7.4: * libgnutls: Added support for certificate compression as defined in RFC8879. * certtool: Added option --compress-cert that allows user to specify compression methods for certificate compression. * libgnutls: GnuTLS can now be compiled with --enable-strict-x509 configure option to enforce stricter certificate sanity checks that are compliant with RFC5280. * libgnutls: Removed IA5String type from DirectoryString within issuer and subject name to make DirectoryString RFC5280 compliant. * libgnutls: Added function to retrieve the name of current ciphersuite from session. * Bump libgnutlsxx soname due to ABI break * API and ABI modifications: - GNUTLS_COMP_BROTLI: New gnutls_compression_method_t enum member - GNUTLS_COMP_ZSTD: New gnutls_compression_method_t enum member - gnutls_compress_certificate_get_selected_method: Added - gnutls_compress_certificate_set_methods: Added * Update gnutls.keyring - build with lto - build with -Wl,-z,now -Wl,-z,relro - build without -fanalyzer, which cuts build time in ~ half - Update to 3.7.3: [bsc#1190698, bsc#1190796] * libgnutls: The allowlisting configuration mode has been added to the system-wide settings. In this mode, all the algorithms are initially marked as insecure or disabled, while the applications can re-enable them either through the [overrides] section of the configuration file or the new API (#1172). * The build infrastructure no longer depends on GNU AutoGen for generating command-line option handling, template file parsing in certtool, and documentation generation (#773, #774). This change also removes run-time or bundled dependency on the libopts library, and requires Python 3.6 or later to regenerate the distribution tarball. Note that this brings in known backward incompatibility in command-line tools, such as long options are now case sensitive, while previously they were treated in a case insensitive manner: for example --RSA is no longer a valid option of certtool. The existing scripts using GnuTLS tools may need adjustment for this change. * libgnutls: The tpm2-tss-engine compatible private blobs can be loaded and used as a gnutls_privkey_t (#594). The code was originally written for the OpenConnect VPN project by David Woodhouse. To generate such blobs, use the tpm2tss-genkey tool from tpm2-tss-engine: https://github.com/tpm2-software/tpm2-tss-engine/#rsa-operations or the tpm2_encodeobject tool from unreleased tpm2-tools. * libgnutls: The library now transparently enables Linux KTLS (kernel TLS) when the feature is compiled in with --enable-ktls configuration option (#1113). If the KTLS initialization fails it automatically falls back to the user space implementation. * certtool: The certtool command can now read the Certificate Transparency (RFC 6962) SCT extension (#232). New API functions are also provided to access and manipulate the extension values. * certtool: The certtool command can now generate, manipulate, and evaluate x25519 and x448 public keys, private keys, and certificates. * libgnutls: Disabling a hashing algorithm through "insecure-hash" configuration directive now also disables TLS ciphersuites that use it as a PRF algorithm. * libgnutls: PKCS#12 files are now created with modern algorithms by default (!1499). Previously certtool used PKCS12-3DES-SHA1 for key derivation and HMAC-SHA1 as an integity measure in PKCS#12. Now it uses AES-128-CBC with PBKDF2 and SHA-256 for both key derivation and MAC algorithms, and the default PBKDF2 iteration count has been increased to 600000. * libgnutls: PKCS#12 keys derived using GOST algorithm now uses HMAC_GOSTR3411_2012_512 instead of HMAC_GOSTR3411_2012_256 for integrity, to conform with the latest TC-26 requirements (#1225). * libgnutls: The library now provides a means to report the status of approved cryptographic operations (!1465). To adhere to the FIPS140-3 IG 2.4.C., this complements the existing mechanism to prohibit the use of unapproved algorithms by making the library unusable state. * gnutls-cli: The gnutls-cli command now provides a --list-config option to print the library configuration (!1508). * libgnutls: Fixed possible race condition in gnutls_x509_trust_list_verify_crt2 when a single trust list object is shared among multiple threads (#1277). [GNUTLS-SA-2022-01-17, CVSS: low] * API and ABI modifications: GNUTLS_PRIVKEY_FLAG_RSA_PSS_FIXED_SALT_LENGTH: new flag in gnutls_privkey_flags_t GNUTLS_VERIFY_RSA_PSS_FIXED_SALT_LENGTH: new flag in gnutls_certificate_verify_flags gnutls_ecc_curve_set_enabled: Added. gnutls_sign_set_secure: Added. gnutls_sign_set_secure_for_certs: Added. gnutls_digest_set_secure: Added. gnutls_protocol_set_enabled: Added. gnutls_fips140_context_init: New function gnutls_fips140_context_deinit: New function gnutls_fips140_push_context: New function gnutls_fips140_pop_context: New function gnutls_fips140_get_operation_state: New function gnutls_fips140_operation_state_t: New enum gnutls_transport_is_ktls_enabled: New function gnutls_get_library_configuration: New function * Remove patches fixed in the update: - gnutls-FIPS-module-version.patch - gnutls-FIPS-service-indicator.patch - gnutls-FIPS-service-indicator-public-key.patch - gnutls-FIPS-service-indicator-symmetric-key.patch - gnutls-FIPS-RSA-PSS-flags.patch - gnutls-FIPS-RSA-mod-sizes.patch - FIPS: Fix regression tests in fips and non-fips mode [bsc#1194468] * Add gnutls-FIPS-disable-failing-tests.patch * Remove patches: - gnutls-temporarily_disable_broken_guile_reauth_test.patch - disable-psk-file-test.patch - FIPS: Provide module identifier and version [bsc#1190796] * Add configurable options to output the module name/identifier (--with-fips140-module-name) and the module version (--with-fips140-module-version). * Add the CLI option list-config that reports the configuration of the library. * Add gnutls-FIPS-module-version.patch - FIPS: Provide a service-level indicator [bsc#1190698] * Add support for a "service indicator" as required in the FIPS140-3 Implementation Guidance in section 2.4.C * Add patches: - gnutls-FIPS-service-indicator.patch - gnutls-FIPS-service-indicator-public-key.patch - gnutls-FIPS-service-indicator-symmetric-key.patch - gnutls-FIPS-RSA-PSS-flags.patch - FIPS: RSA KeyGen/SigGen fail with 4096 bit key sizes [bsc#1192008] * fips: allow more RSA modulus sizes * Add gnutls-FIPS-RSA-mod-sizes.patch * Delete gnutls-3.6.7-fips-rsa-4096.patch - Drop bogus condition "> 1550": that would mean 'more recent than Tumbleweed' which is technically impossible, as Tumbleweed is the leading project (and the condition causes issues as Tumbleweed needs to move away from 1550 due to CODE 15 SP5 plans). - Add crypto-policies support for Leap and SLE 15.4 [jsc#SLE-20287] - Add DANE guards - Remove gnutls-temporarily_disable_broken_guile_reauth_test.patch since its already working. - Update to version 3.7.2 * Added Linux kernel AF_ALG based acceleration * Fixed timing of early data exchange * The priority string option DISABLE_TLS13_COMPAT_MODE was added to disable TLS 1.3 middlebox compatibility mode * The GNUTLS_NO_EXPLICIT_INIT envvar has been renamed to GNUTLS_NO_IMPLICIT_INIT to reflect the purpose * certtool: * When signing a CSR, CRL distribution point (CDP) is no longer copied from the signing CA by default * When producing certificates and certificate requests, subject DN components that are provided individually will now be ordered by assumed scale - Rework the crypto-policies dependencies in libraries [bsc#1186385] - Compute the FIPS hmac file without re-defining the __os_install_post macro, use the brp-50-generate-fips-hmac script instead. [bsc#1184555] - Require the main package in devel and lib packages as the default priorities are now set via crypto-policies. [bsc#1183082] - Update to 3.7.1: [bsc#1183456, CVE-2021-20232] [bsc#1183457, CVE-2021-20231] * Fixed potential use-after-free in sending "key_share" and "pre_shared_key" extensions. * Fixed a regression in handling duplicated certs in a chain. * Fixed sending of session ID in TLS 1.3 middlebox compatibility mode. In that mode the client shall always send a non-zero session ID to make the handshake resemble the TLS 1.2 resumption; this was not true in the previous versions. * Removed dependency on the external 'fipscheck' package, when compiled with --enable-fips140-mode. * Added padlock acceleration for AES-192-CBC. - Remove patches upstream: * gnutls-gnutls-cli-debug.patch * gnutls-ignore-duplicate-certificates.patch * gnutls-test-fixes.patch - Fix the test suite for tests/gnutls-cli-debug.sh [bsc#1171565] * Don't unset system priority settings in gnutls-cli-debug.sh * Upstream: gitlab.com/gnutls/gnutls/merge_requests/1387 - Add gnutls-gnutls-cli-debug.patch - Fix: Test certificates in tests/testpkcs11-certs have expired * Upstream bug: gitlab.com/gnutls/gnutls/issues/1135 - Add gnutls-test-fixes.patch - gnutls_x509_trust_list_verify_crt2: ignore duplicate certificates * Upstream bug: https://gitlab.com/gnutls/gnutls/issues/1131 - Add gnutls-ignore-duplicate-certificates.patch - Update to 3.7.0 * Depend on nettle 3.6 * Added a new API that provides a callback function to retrieve missing certificates from incomplete certificate chains * Added a new API that provides a callback function to output the complete path to the trusted root during certificate chain verification * OIDs exposed as gnutls_datum_t no longer account for the terminating null bytes, while the data field is null terminated. The affected API functions are: gnutls_ocsp_req_get_extension, gnutls_ocsp_resp_get_response, and gnutls_ocsp_resp_get_extension * Added a new set of API to enable QUIC implementation * The crypto implementation override APIs deprecated in 3.6.9 are now no-op * Added MAGMA/KUZNYECHIK CTR-ACPKM and CMAC support * Support for padlock has been fixed to make it work with Zhaoxin CPU * The maximum PIN length for PKCS #11 has been increased from 31 bytes to 255 bytes - Remove patch fixed upstream: * gnutls-FIPS-use_2048_bit_prime_in_DH_selftest.patch - Add version guards for the crypto-policies package - Fix threading bug in libgnutls [bsc#1173434] * Upstream bug: gitlab.com/gnutls/gnutls/issues/1044 - Require the crypto-policies package [bsc#1180051] - Use the centralized crypto policy profile (jsc#SLE-15832) - FIPS: Use 2048 bit prime in DH selftest (bsc#1176086) * add gnutls-FIPS-use_2048_bit_prime_in_DH_selftest.patch - FIPS: Add TLS KDF selftest (bsc#1176671) * add gnutls-FIPS-TLS_KDF_selftest.patch - Escape rpm command %%expand when used in comment. - Update to 3.6.15 * libgnutls: Fixed "no_renegotiation" alert handling at incorrect timing. [GNUTLS-SA-2020-09-04, CVSS: medium] * libgnutls: If FIPS self-tests are failed, gnutls_fips140_mode_enabled() now indicates that with a false return value (!1306). * libgnutls: Under FIPS mode, the generated ECDH/DH public keys are checked accordingly to SP800-56A rev 3 (!1295, !1299). * libgnutls: gnutls_x509_crt_export2() now returns 0 upon success, rather than the size of the internal base64 blob (#1025). * libgnutls: Certificate verification failue due to OCSP must-stapling is not honered is now correctly marked with the GNUTLS_CERT_INVALID flag * libgnutls: The audit log message for weak hashes is no longer printed twice * libgnutls: Fixed version negotiation when TLS 1.3 is enabled and TLS 1.2 is disabled in the priority string. Previously, even when TLS 1.2 is explicitly disabled with "-VERS-TLS1.2", the server still offered TLS 1.2 if TLS 1.3 is enabled (#1054). - drop upstreamed patches: * gnutls-detect_nettle_so.patch * 0001-crypto-api-always-allocate-memory-when-serializing-i.patch - Correctly detect gmp, nettle, and hogweed libraries (bsc#1172666) * add gnutls-detect_nettle_so.patch - Fix a memory leak that could lead to a DoS attack against Samba servers (bsc#1172663) * add 0001-crypto-api-always-allocate-memory-when-serializing-i.patch - Temporarily disable broken guile reauth test (bsc#1171565) * add gnutls-temporarily_disable_broken_guile_reauth_test.patch - Update to 3.6.14 * libgnutls: Fixed insecure session ticket key construction, since 3.6.4. The TLS server would not bind the session ticket encryption key with a value supplied by the application until the initial key rotation, allowing attacker to bypass authentication in TLS 1.3 and recover previous conversations in TLS 1.2 (#1011). (bsc#1172506, CVE-2020-13777) [GNUTLS-SA-2020-06-03, CVSS: high] * libgnutls: Fixed handling of certificate chain with cross-signed intermediate CA certificates (#1008). (bsc#1172461) * libgnutls: Fixed reception of empty session ticket under TLS 1.2 (#997). * libgnutls: gnutls_x509_crt_print() is enhanced to recognizes commonName (2.5.4.3), decodes certificate policy OIDs (!1245), and prints Authority Key Identifier (AKI) properly (#989, #991). * certtool: PKCS #7 attributes are now printed with symbolic names (!1246). * libgnutls: Use accelerated AES-XTS implementation if possible (!1244). Also both accelerated and non-accelerated implementations check key block according to FIPS-140-2 IG A.9 (!1233). * libgnutls: Added support for AES-SIV ciphers (#463). * libgnutls: Added support for 192-bit AES-GCM cipher (!1267). * libgnutls: No longer use internal symbols exported from Nettle (!1235) * API and ABI modifications: GNUTLS_CIPHER_AES_128_SIV: Added GNUTLS_CIPHER_AES_256_SIV: Added GNUTLS_CIPHER_AES_192_GCM: Added gnutls_pkcs7_print_signature_info: Added - Add key D605848ED7E69871: public key "Daiki Ueno " to the keyring - Drop gnutls-fips_correct_nettle_soversion.patch (upstream) - Use correct nettle .so version when looking for a FIPS checksum (bsc#1166635) * add gnutls-fips_correct_nettle_soversion.patch - Update to 3.6.13 * libgnutls: Fix a DTLS-protocol regression (caused by TLS1.3 support) The DTLS client would not contribute any randomness to the DTLS negotiation, breaking the security guarantees of the DTLS protocol (#960) [GNUTLS-SA-2020-03-31, CVSS: high] (bsc#1168345) * libgnutls: Added new APIs to access KDF algorithms (#813). * libgnutls: Added new callback gnutls_keylog_func that enables a custom logging functionality. * libgnutls: Added support for non-null terminated usernames in PSK negotiation (#586). * gnutls-cli-debug: Improved support for old servers that only support SSL 3.0. - Split off FIPS checksums into a separate libgnutls30-hmac subpackage (bsc#1152692) - gnutls 3.6.12 * libgnutls: Introduced TLS session flag (gnutls_session_get_flags()) to identify sessions that client request OCSP status request (#829). * libgnutls: Added support for X448 key exchange (RFC 7748) and Ed448 signature algorithm (RFC 8032) under TLS (#86). * libgnutls: Added the default-priority-string option to system configuration; it allows overriding the compiled-in default-priority-string. * libgnutls: Added support for GOST CNT_IMIT ciphersuite (as defined by draft-smyshlyaev-tls12-gost-suites-07). By default this ciphersuite is disabled. It can be enabled by adding +GOST to priority string. In the future this priority string may enable other GOST ciphersuites as well. Note, that server will fail to negotiate GOST ciphersuites if TLS 1.3 is enabled both on a server and a client. It is recommended for now to disable TLS 1.3 in setups where GOST ciphersuites are enabled on GnuTLS-based servers. * libgnutls: added priority shortcuts for different GOST categories like CIPHER-GOST-ALL, MAC-GOST-ALL, KX-GOST-ALL, SIGN-GOST-ALL, GROUP-GOST-ALL. * libgnutls: Reject certificates with invalid time fields. That is we reject certificates with invalid characters in Time fields, or invalid time formatting To continue accepting the invalid form compile with --disable-strict-der-time * libgnutls: Reject certificates which contain duplicate extensions. We were previously printing warnings when printing such a certificate, but that is not always sufficient to flag such certificates as invalid. Instead we now refuse to import them (#887). * libgnutls: If a CA is found in the trusted list, check in addition to time validity, whether the algorithms comply to the expected level prior to accepting it. This addresses the problem of accepting CAs which would have been marked as insecure otherwise (#877). * libgnutls: The min-verification-profile from system configuration applies for all certificate verifications, not only under TLS. The configuration can be overriden using the GNUTLS_SYSTEM_PRIORITY_FILE environment variable. * libgnutls: The stapled OCSP certificate verification adheres to the convention used throughout the library of setting the 'GNUTLS_CERT_INVALID' flag. * libgnutls: On client side only send OCSP staples if they have been requested by the server, and on server side always advertise that we support OCSP stapling * libgnutls: Introduced the gnutls_ocsp_req_const_t which is compatible with gnutls_ocsp_req_t but const. * certtool: Added the --verify-profile option to set a certificate verification profile. Use '--verify-profile low' for certificate verification to apply the 'NORMAL' verification profile. * certtool: The add_extension template option is considered even when generating a certificate from a certificate request. - gnutls 3.6.11.1: * libgnutls: Corrected issue with TLS 1.2 session ticket handling as client during resumption * libgnutls: gnutls_base64_decode2() succeeds decoding the empty string to the empty string. This is a behavioral change of the API but it conforms to the RFC4648 expectations * libgnutls: Fixed AES-CFB8 implementation, when input is shorter than the block size. Fix backported from nettle. * certtool: CRL distribution points will be set in CA certificates even when non self-signed * gnutls-cli/serv: added raw public-key handling capabilities (RFC7250). Key material can be set via the --rawpkkeyfile and - -rawpkfile flags. - gnutls 3.6.10: * Add support for deterministic ECDSA/DSA (RFC6979) * Add functions for in-place encryption/decryption of data buffers * server now selects the highest TLS protocol version, if TLS 1.3 is enabled and the client advertises an older protocol version first * Add support for GOST 28147-89 cipher in CNT (GOST counter) mode and MAC generation based on GOST 28147-89 (IMIT) * certtool: when outputting an encrypted private key do not insert the textual description of it - Install checksums for binary integrity verification which are required when running in FIPS mode (bsc#1152692, jsc#SLE-9518) - gnutls 3.6.9: * add support for copying digest or MAC contexts * Mark the crypto implementation override APIs as deprecated * Add support for AES-GMAC, as a separate to GCM, MAC algorithm * Add support for Generalname registeredID * The priority configuration was enhanced to allow more elaborate system-wide configuration of the library - includes changes from 3.6.8: * Add support for AES-XTS cipher * Fix calculation of Streebog digests * During Diffie-Hellman operations in TLS, verify that the peer's public key is on the right subgroup (y^q=1 mod p), when q is available (under TLS 1.3 and under earlier versions when RFC7919 parameters are used). * Apply STD3 ASCII rules in gnutls_idna_map() to prevent hostname/domain crafting via IDNA conversion * certtool: allow the digital signature key usage flag in CA certificates * gnutls-cli/serv: add the --keymatexport and --keymatexportsize options. These allow testing the RFC5705 using these tools - drop patches to re-enable tests: * disable-psk-file-test.patch * gnutls-3.6.0-disable-flaky-dtls_resume-test.patch - Trim useless %if..%endif guards that do not affect the build. - Fix language errors in description again. - Update gnutls to 3.6.7 * * libgnutls, gnutls tools: Every gnutls_free() will automatically set the free'd pointer to NULL. This prevents possible use-after-free and double free issues. Use-after-free will be turned into NULL dereference. The counter-measure does not extend to applications using gnutls_free(). * * libgnutls: Fixed a memory corruption (double free) vulnerability in the certificate verification API. Reported by Tavis Ormandy; addressed with the change above. [GNUTLS-SA-2019-03-27, #694] [bsc#1130681] (CVE-2019-3829) * * libgnutls: Fixed an invalid pointer access via malformed TLS1.3 async messages; Found using tlsfuzzer. [GNUTLS-SA-2019-03-27, #704] [bsc#1130682] (CVE-2019-3836) * * libgnutls: enforce key usage limitations on certificates more actively. Previously we would enforce it for TLS1.2 protocol, now we enforce it even when TLS1.3 is negotiated, or on client certificates as well. When an inappropriate for TLS1.3 certificate is seen on the credentials structure GnuTLS will disable TLS1.3 support for that session (#690). * * libgnutls: the default number of tickets sent under TLS 1.3 was increased to two. This makes it easier for clients which perform multiple connections to the server to use the tickets sent by a default server. * * libgnutls: enforce the equality of the two signature parameters fields in a certificate. We were already enforcing the signature algorithm, but there was a bug in parameter checking code. * * libgnutls: fixed issue preventing sending and receiving from different threads when false start was enabled (#713). * * libgnutls: the flag GNUTLS_PKCS11_OBJ_FLAG_LOGIN_SO now implies a writable session, as non-writeable security officer sessions are undefined in PKCS#11 (#721). * * libgnutls: no longer send downgrade sentinel in TLS 1.3. Previously the sentinel value was embedded to early in version negotiation and was sent even on TLS 1.3. It is now sent only when TLS 1.2 or earlier is negotiated (#689). * * gnutls-cli: Added option --logfile to redirect informational messages output. - Disabled dane support in SLE since dane is not shipped there - Changed configure script to hardware guile site directory since command-line option '--with-guile-site-dir=' was removed from the configure script. * * Added gnutls-3.6.6-set_guile_site_dir.patch - Modified gnutls-3.6.0-disable-flaky-dtls_resume-test.patch to fix compilation issues on PPC - Update to 3.6.6 * * libgnutls: gnutls_pubkey_import_ecc_raw() was fixed to set the number bits on the public key (#640). * * libgnutls: Added support for raw public-key authentication as defined in RFC7250. Raw public-keys can be negotiated by enabling the corresponding certificate types via the priority strings. The raw public-key mechanism must be explicitly enabled via the GNUTLS_ENABLE_RAWPK init flag (#26, #280). * * libgnutls: When on server or client side we are sending no extensions we do not set an empty extensions field but we rather remove that field competely. This solves a regression since 3.5.x and improves compatibility of the server side with certain clients. * * libgnutls: We no longer mark RSA keys in PKCS#11 tokens as RSA-PSS capable if the CKA_SIGN is not set (#667). * * libgnutls: The priority string option %NO_EXTENSIONS was improved to completely disable extensions at all cases, while providing a functional session. This also implies that when specified, TLS1.3 is disabled. * * libgnutls: GNUTLS_X509_NO_WELL_DEFINED_EXPIRATION was marked as deprecated. The previous definition was non-functional (#609). - drop no longer needed gnutls-enbale-guile-2.2.patch - refresh disable-psk-file-test.patch - Update to 3.6.5 * * libgnutls: Provide the option of transparent re-handshake/reauthentication when the GNUTLS_AUTO_REAUTH flag is specified in gnutls_init() (#571). * * libgnutls: Added support for TLS 1.3 zero round-trip (0-RTT) mode (#127) * * libgnutls: The priority functions will ignore and not enable TLS1.3 if requested with legacy TLS versions enabled but not TLS1.2. That is because if such a priority string is used in the client side (e.g., TLS1.3+TLS1.0 enabled) servers which do not support TLS1.3 will negotiate TLS1.2 which will be rejected by the client as disabled (#621). * * libgnutls: Change RSA decryption to use a new side-channel silent function. This addresses a security issue where memory access patterns as well as timing on the underlying Nettle rsa-decrypt function could lead to new Bleichenbacher attacks. Side-channel resistant code is slower due to the need to mask access and timings. When used in TLS the new functions cause RSA based handshakes to be between 13% and 28% slower on average (Numbers are indicative, the tests where performed on a relatively modern Intel CPU, results vary depending on the CPU and architecture used). This change makes nettle 3.4.1 the minimum requirement of gnutls (#630). [CVSS: medium] * * libgnutls: gnutls_priority_init() and friends, allow the CTYPE-OPENPGP keyword in the priority string. It is only accepted as legacy option and is ignored. * * libgnutls: Added support for EdDSA under PKCS#11 (#417) * * libgnutls: Added support for AES-CFB8 cipher (#357) * * libgnutls: Added support for AES-CMAC MAC (#351) * * libgnutls: In two previous versions GNUTLS_CIPHER_GOST28147_CPB/CPC/CPD_CFB ciphers have incorrectly used CryptoPro-A S-BOX instead of proper (CryptoPro-B/-C/-D S-BOXes). They are fixed now. * * libgnutls: Added support for GOST key unmasking and unwrapped GOST private keys parsing, as specified in R 50.1.112-2016. * * gnutls-serv: It applies the default settings when no --priority option is given, using gnutls_set_default_priority(). * * p11tool: Fix initialization of security officer's PIN with the --initialize-so-pin option (#561) * * certtool: Add parameter --no-text that prevents certtool from outputting text before PEM-encoded private key, public key, certificate, CRL or CSR. - minimum required libnettle is now 3.4.1 - refresh * disable-psk-file-test.patch * gnutls-3.6.0-disable-flaky-dtls_resume-test.patch ==== kdsoap ==== - Add a Qt6 flavor for kdsoap. ==== logrotate ==== Version update (3.19.0 -> 3.20.1) - update to 3.20.1: * drop world-readable permission on state file even when ACLs are enabled (#446) - removed obsolete logrotate-CVE-2022-1348-follow-up.patch - Security fix: (bsc#1199652, CVE-2022-1348) * Add follow-up upstream patch for the introduced fix. * Added patch logrotate-CVE-2022-1348-follow-up.patch - Update patch: * logrotate-3.19.0-man_logrotate.patch -> logrotate-3.20.0-man_logrotate.patch - update to 3.20.0: * fix potential DoS from unprivileged users via the state file (CVE-2022-1348) * fix a misleading debug message with copytruncate and rotate 0 (#443) * add support for unsigned time_t (#438) * do not lock state file /dev/null (#433) ==== podman ==== Subpackages: podman-cni-config - Backport upstream commit be5abf03ababc ("fix: Container.cGroupPath() skip empty line to avoid false error logging") for fixing "Error parsing cgroup: expected 3 fields but got 1" (see bsc#1199790, as it applies to Factory/Tumbleweed too) * 0004-fix-Container.cGroupPath-skip-empty-line-to-avoid-fa.patch ==== python-psutil ==== Version update (5.9.0 -> 5.9.1) - removed obsolete skip-partitions-erros.patch - update to 5.9.1 * Enhancements - 1053: drop Python 2.6 support. (patches by Matthieu Darbois and Hugo van Kemenade) - 2050, [Linux]: increase read(2) buffer size from 1k to 32k when reading /proc pseudo files line by line. This should help having more consistent results. - 2057, [OpenBSD]: add support for cpu_freq(). - 2107, [Linux]: Process.memory_full_info() (reporting process USS/PSS/Swap memory) now reads /proc/pid/smaps_rollup instead of /proc/pids/smaps, which makes it 5 times faster. * Bug fixes - 2048: AttributeError is raised if psutil.Error class is raised manually and passed through str. - 2049, [Linux]: cpu_freq() erroneously returns curr value in GHz while min and max are in MHz. - 2050, [Linux]: virtual_memory() may raise ValueError if running in a LCX container. ==== qemu ==== - Filter out rpmlint error that is valid for qemu, but will have its badness increased in the future. - enable aio=io_uring on all kvm architectures (bsc#1197699) - Backport aqmp patches from upstream which can fix iotest issues * Patches added: python-aqmp-add-__del__-method-to-legacy.patch python-aqmp-add-_session_guard.patch python-aqmp-add-SocketAddrT-to-package-r.patch python-aqmp-add-socket-bind-step-to-lega.patch python-aqmp-add-start_server-and-accept-.patch python-aqmp-copy-type-definitions-from-q.patch python-aqmp-drop-_bind_hack.patch python-aqmp-fix-docstring-typo.patch python-aqmp-Fix-negotiation-with-pre-oob.patch python-aqmp-fix-race-condition-in-legacy.patch Python-aqmp-fix-type-definitions-for-myp.patch python-aqmp-handle-asyncio.TimeoutError-.patch python-aqmp-refactor-_do_accept-into-two.patch python-aqmp-remove-_new_session-and-_est.patch python-aqmp-rename-accept-to-start_serve.patch python-aqmp-rename-AQMPError-to-QMPError.patch python-aqmp-split-_client_connected_cb-o.patch python-aqmp-squelch-pylint-warning-for-t.patch python-aqmp-stop-the-server-during-disco.patch python-introduce-qmp-shell-wrap-convenie.patch python-machine-raise-VMLaunchFailure-exc.patch python-move-qmp-shell-under-the-AQMP-pac.patch python-move-qmp-utilities-to-python-qemu.patch python-qmp-switch-qmp-shell-to-AQMP.patch python-support-recording-QMP-session-to-.patch python-upgrade-mypy-to-0.780.patch - Drop the patches which are workaround to fix iotest issues * Patches dropped: Revert-python-iotests-replace-qmp-with-a.patch Revert-python-machine-add-instance-disam.patch Revert-python-machine-add-sock_dir-prope.patch Revert-python-machine-handle-fast-QEMU-t.patch Revert-python-machine-move-more-variable.patch Revert-python-machine-remove-_remove_mon.patch - Support the SGX feature (bsc#1197807) * Patches added: doc-Add-the-SGX-numa-description.patch numa-Enable-numa-for-SGX-EPC-sections.patch numa-Support-SGX-numa-in-the-monitor-and.patch - Backport CVE-2021-3929 (bsc#1193880) * Patches added: hw-nvme-fix-CVE-2021-3929.patch - The patches from upstream cause testsuit failures (bsc#1197150 bsc#1197528) * Patches added: Revert-python-iotests-replace-qmp-with-a.patch Revert-python-machine-add-instance-disam.patch Revert-python-machine-add-sock_dir-prope.patch Revert-python-machine-handle-fast-QEMU-t.patch Revert-python-machine-move-more-variable.patch Revert-python-machine-remove-_remove_mon.patch - Add missing patch from a PTFs (bsc#1194938) * Patches added: scsi-generic-check-for-additional-SG_IO-.patch - Kill downstream patches around bifmt handling that makes cumbersome to run multi-arch containers, and switch to the upstream behavior, which is well documented and valid on all other distros. This is possible thanks to Linux kernel commit 2347961b11d4 and QEMU commit 6e1c0d7b951e19c53 (so it can only work on Leap/SLE 15.4 and higher). (bsc#1197298) * Patches dropped: qemu-binfmt-conf.sh-allow-overriding-SUS.patch qemu-binfmt-conf-use-qemu-ARCH-binfmt.patch - Fix update_git.sh wiping all the package file of the local checkout while cloning the git repository on demand (in case they don't exist and the user as to do so). - Improve test reliability * Patches added: Fix-the-module-building-problem-for-s390.patch tests-qemu-iotests-040-Skip-TestCommitWi.patch tests-qemu-iotests-testrunner-Quote-case.patch - Fix virtiofs crashing with glibc >= 2.35, due to rseq syscall (bsc#1196924) * Patches added: tools-virtiofsd-Add-rseq-syscall-to-the-.patch - Avoid warnings caused by a GCC 12 bug, see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98503 (bsc#1197018) * Patches added: hw-i386-amd_iommu-Fix-maybe-uninitialize.patch Silence-GCC-12-spurious-warnings.patch Ignore-spurious-GCC-12-warning.patch - Proactive fix * Patches added: hw-nvram-at24-return-0xff-if-1-byte-addr.patch - Build PPC firmwares from sources on non-PPC builds as well (bsc#1193545) - Build RiscV firmwares on non-RiscV builds as well - While there, refactor (and simplify!) the firmware building logic and code * Patches added: Makefile-define-endianess-for-cross-buil.patch Makefile-fix-build-with-binutils-2.38.patch - qemu,kvm,xen: NULL pointer dereference issue in megasas-gen2 host bus adapter (bsc#1180432, CVE-2020-35503) * Patches added: hw-scsi-megasas-check-for-NULL-frame-in-.patch - Include vmxcap in the qemu-tools package (is being very useful for debugging bsc#1193364) - The qemu package should require qemu-x86, qemu-arm, etc, as there's no point installing it without _any_ of them. Additionally, right now, the user does not get a working qemu, if recommended packages are disabled (e.g., on MicroOS or SLE Micro). bsc#1196087 - Give clearer instructions on how to modify the package patches from the output of update_git.sh (docs change only, no functional change) - qemu,kvm: potential privilege escalation via virtiofsd (bsc#1195161, CVE-2022-0358) * Patches added: virtiofsd-Drop-membership-of-all-supplem.patch * Patches added: block-backend-Retain-permissions-after-m.patch iotest-065-explicit-compression-type.patch iotest-214-explicit-compression-type.patch iotest-302-use-img_info_log-helper.patch iotest-303-explicit-compression-type.patch iotest-39-use-_qcow2_dump_header.patch iotests-60-more-accurate-set-dirty-bit-i.patch iotests-bash-tests-filter-compression-ty.patch iotests-common.rc-introduce-_qcow2_dump_.patch iotests-declare-lack-of-support-for-comp.patch iotests-drop-qemu_img_verbose-helper.patch iotests-massive-use-_qcow2_dump_header.patch iotests-MRCE-Write-data-to-source.patch iotests.py-filter-out-successful-output-.patch iotests.py-img_info_log-rename-imgopts-a.patch iotests.py-implement-unsupported_imgopts.patch iotests.py-qemu_img-create-support-IMGOP.patch iotests.py-rewrite-default-luks-support-.patch iotests-specify-some-unsupported_imgopts.patch qcow2-simple-case-support-for-downgradin.patch tests-qemu-iotests-Fix-051-for-binaries-.patch -Backport patch from upstream, bsc#1194063 CVE-2021-4158 * Patches added: acpi-validate-hotplug-selector-on-access.patch - Enable modules for testsuite * Patches added: meson-build-all-modules-by-default.patch - It's time to really start requiring -F when using -b in qemu-img for us as well. Users/customers have been warned in the relevant release notes (bsc#1190135) * Patches dropped: Revert-qemu-img-Improve-error-for-rebase.patch Revert-qemu-img-Require-F-with-b-backing.patch - Fix testsuite failures by not using modules when building tests (and some other, also testsuite related, spec file problems) - [JIRA] (SLE-20965) Make QEMU guests more failsafe when resizing SCSI passthrough disks * Patches added: scsi-generic-replace-logical-block-count.patch - Add an audio-oss sub-package - Add some new (mostly documentation) files in the package - Remove option --audio-drv-list because audio is detected by meson automatically in latest version. - Remove options --disable-jemalloc and --disable-tcmalloc which are changed in v6.2.0. - Update to v 6.2.0. For full release notese, see: * https://wiki.qemu.org/ChangeLog/6.2. Be sure to also check the following pages: * https://qemu-project.gitlab.io/qemu/about/removed-features.html * https://qemu-project.gitlab.io/qemu/about/deprecated.html Some notable changes: * virtio-mem: guest memory dumps are now fully supported, along with pre-copy/post-copy migration and background guest snapshots * QMP: support for nw DEVICE_UNPLUG_GUEST_ERROR to detect guest-reported hotplug failures * TCG: improvements to TCG plugin argument syntax, and multi-core support for cache plugin * 68k: improved support for Apple?s NuBus, including ability to load declaration ROMs, and slot IRQ support * ARM: macOS hosts with Apple Silicon CPUs now support ?hvf? accelerator for AArch64 guests * ARM: emulation support for Fujitsu A64FX processor model * ARM: emulation support for kudo-mbc machine type * ARM: M-profile MVE extension is now supported for Cortex-M55 * ARM: ?virt? machine now supports an emulated ITS (Interrupt Translation Service) and supports more than 123 CPUs in emulation mode * ARM: xlnx-zcu102 and xlnx-versal-virt machines now support BBRAM and eFUSE devices * PowerPC: improved POWER10 support for the ?powernv? machine type * PowerPC: initial support for POWER10 DD2.0 CPU model * PowerPC: support for FORM2 PAPR NUMA descriptions for ?pseries? machine type * RISC-V: support for Zb[abcs] instruction set extensions * RISC-V: support for vhost-user and numa mem options across all boards * RISC-V: SiFive PWM support * x86: support for new Snowridge-v4 CPU model * x86: guest support for Intel SGX * x86: AMD SEV guests now support measurement of kernel binary when doing direct kernel boot (not using a bootloader) * Patches dropped: 9pfs-fix-crash-in-v9fs_walk.patch block-introduce-max_hw_iov-for-use-in-sc.patch hmp-Unbreak-change-vnc.patch hw-acpi-ich9-Add-compat-prop-to-keep-HPC.patch hw-i386-acpi-build-Deny-control-on-PCIe-.patch i386-cpu-Remove-AVX_VNNI-feature-from-Co.patch net-vmxnet3-validate-configuration-value.patch pcie-rename-native-hotplug-to-x-native-h.patch plugins-do-not-limit-exported-symbols-if.patch plugins-execlog-removed-unintended-s-at-.patch qemu-nbd-Change-default-cache-mode-to-wr.patch qemu-sockets-fix-unix-socket-path-copy-a.patch target-arm-Don-t-skip-M-profile-reset-en.patch target-i386-add-missing-bits-to-CR4_RESE.patch tcg-arm-Fix-tcg_out_vec_op-function-sign.patch uas-add-stream-number-sanity-checks.patch vhost-vsock-fix-migration-issue-when-seq.patch virtio-balloon-don-t-start-free-page-hin.patch virtio-mem-pci-Fix-memory-leak-when-crea.patch virtio-net-fix-use-after-unmap-free-for-.patch - Reinstate Lin Ma's fixes for bsc#1192147 as they were submitted only to IBS. * Patches added: hw-acpi-ich9-Add-compat-prop-to-keep-HPC.patch hw-i386-acpi-build-Deny-control-on-PCIe-.patch pcie-rename-native-hotplug-to-x-native-h.patch - Rename the Guest Agent service qemu-guest-agent, like in other distros (and upstream). bsc#1185543 - disable QOM cast debug outside the testsuite as the corresponding asserts show up occassionally as top #1 in perf(1) traces under heavy virtio load - enable LTO when we'd like to use LTO * Patches added (bsc#1186256): qemu-binfmt-conf.sh-allow-overriding-SUS.patch - cross-i386-binutils and cross-i386-gcc are not needed and were dropped from Factory - boo#1193424 - qemu: virtio-net: heap use-after-free in virtio_net_receive_rcu (bsc#1189938 CVE-2021-3748) solved by virtio-net-fix-use-after-unmap-free-for-.patch - kvm,qemu: out-of-bounds write in UAS (USB Attached SCSI) device emulation (bsc#1189702 CVE-2021-3713) * Patches added: uas-add-stream-number-sanity-checks.patch - Stable fixes from upstream * Patches added: block-introduce-max_hw_iov-for-use-in-sc.patch hmp-Unbreak-change-vnc.patch qemu-nbd-Change-default-cache-mode-to-wr.patch target-arm-Don-t-skip-M-profile-reset-en.patch vhost-vsock-fix-migration-issue-when-seq.patch virtio-mem-pci-Fix-memory-leak-when-crea.patch virtio-net-fix-use-after-unmap-free-for-.patch - Fix testsuite dependencies (bsc#1190573) * Patches added: modules-quick-fix-a-fundamental-error-in.patch - Replace patch to fix hardcoded binfmt handler (bsc#1186256) * Patches dropped: qemu-binfmt-conf.sh-allow-overriding-SUS.patch * Patches added: qemu-binfmt-conf.sh-should-use-F-as-shor.patch - Stable fixes from upstream * Patches added: 9pfs-fix-crash-in-v9fs_walk.patch i386-cpu-Remove-AVX_VNNI-feature-from-Co.patch plugins-do-not-limit-exported-symbols-if.patch plugins-execlog-removed-unintended-s-at-.patch qemu-sockets-fix-unix-socket-path-copy-a.patch target-i386-add-missing-bits-to-CR4_RESE.patch virtio-balloon-don-t-start-free-page-hin.patch - Fix qemu build on ARMv7 (bsc#1190211) * Patches added: tcg-arm-Fix-tcg_out_vec_op-function-sign.patch - Update supported file for ARM machines. - Keep qemu-img without backing format still deprecated (bsc#1190135) * Patches added: Revert-qemu-img-Improve-error-for-rebase.patch Revert-qemu-img-Require-F-with-b-backing.patch - Update the support files to reflect the deprecation. - Update build dependencies versions: libgcrypt >= 1.8.0, gnutls >= 3.5.18, glib >= 2.56, libssh >= 0.8.7 - Fix hardcoded binfmt handler doesn't play well with containers (bsc#1186256) * Patches added: qemu-binfmt-conf.sh-allow-overriding-SUS.patch - Update to v6.1: see https://wiki.qemu.org/ChangeLog/6.1 For a full list of formely deprecated features that are removed, consult: https://qemu-project.gitlab.io/qemu/about/removed-features.html For a list of new deprecated features, consult: https://qemu-project.gitlab.io/qemu/about/deprecated.html Some noteworthy changes: * Removed moxie CPU. * Removed lm32 CPU. * Removed unicore32 CPU. * Removed 'info cpustats'. * Added Aspeed machines: rainier-bmc, quanta-q7l1-bmc. * Added npcm7xx machine: quanta-gbs-bmc. * Model for Aspeed's Hash and Crypto Engine. * SVE2 is now emulated, including bfloat16 support * FEAT_I8MM, FEAT_TLBIOS, FEAT_TLBRANGE, FEAT_BF16, FEAT_AA32BF16, and FEAT_MTE3 are now emulated. * Improved hot-unplug failures on PowerPC pseries machine. * Implemented some POWER10 instructions in TCG. * Added shakti_c RISC-V machine. * Improved documentation for RISC-V machines. * CPU models for gen16 have been added for s390x. * New CPU model versions added with XSAVES enabled: Skylake-Client-v4, Skylake-Server-v5, Cascadelake-Server-v5, Cooperlake-v2, Icelake-Client-v3, Icelake-Server-v5, Denverton-v3, Snowridge-v3, Dhyana-v2 * Added ACPI based PCI hotplug support to Q35 machine. Enabled and used by default since pc-q35-6.1 machine type. * Added support for the pca9546 and pca9548 I2C muxes. * Added support for PMBus and several PMBus devices. * Crypto subsystem: The preferred crypto backend driver now gnutls, with libgcrypt as the second choice, and nettle as third choice, with ordering driven mostly by performance of the ciphers. * Misc doc improvements. * Patches removed: block-nvme-Fix-VFIO_MAP_DMA-failed-No-sp.patch hmp-Fix-loadvm-to-resume-the-VM-on-succe.patch hw-block-nvme-align-with-existing-style.patch hw-block-nvme-consider-metadata-read-aio.patch hw-net-can-sja1000-fix-buff2frame_bas-an.patch hw-nvme-fix-missing-check-for-PMR-capabi.patch hw-nvme-fix-pin-based-interrupt-behavior.patch hw-pci-host-q35-Ignore-write-of-reserved.patch hw-rdma-Fix-possible-mremap-overflow-in-.patch hw-rx-rx-gdbsim-Do-not-accept-invalid-me.patch hw-usb-Do-not-build-USB-subsystem-if-not.patch hw-usb-host-stub-Remove-unused-header.patch linux-user-aarch64-Enable-hwcap-for-RND-.patch module-for-virtio-gpu-pre-load-module-to.patch monitor-qmp-fix-race-on-CHR_EVENT_CLOSED.patch pvrdma-Ensure-correct-input-on-ring-init.patch pvrdma-Fix-the-ring-init-error-flow-CVE-.patch qemu-config-load-modules-when-instantiat.patch qemu-config-parse-configuration-files-to.patch qemu-config-use-qemu_opts_from_qdict.patch runstate-Initialize-Error-to-NULL.patch sockets-update-SOCKET_ADDRESS_TYPE_FD-li.patch target-i386-Exit-tb-after-wrmsr.patch target-sh4-Return-error-if-CPUClass-get_.patch tcg-Allocate-sufficient-storage-in-temp_.patch tcg-arm-Fix-tcg_out_op-function-signatur.patch tcg-sparc-Fix-temp_allocate_frame-vs-spa.patch ui-Fix-memory-leak-in-qemu_xkeymap_mappi.patch usb-hid-avoid-dynamic-stack-allocation.patch usb-limit-combined-packets-to-1-MiB-CVE-.patch usb-mtp-avoid-dynamic-stack-allocation.patch usb-redir-avoid-dynamic-stack-allocation.patch usbredir-fix-free-call.patch vfio-ccw-Permit-missing-IRQs.patch vhost-user-blk-Check-that-num-queues-is-.patch vhost-user-blk-Don-t-reconnect-during-in.patch vhost-user-blk-Fail-gracefully-on-too-la.patch vhost-user-blk-Get-more-feature-flags-fr.patch vhost-user-blk-Make-sure-to-set-Error-on.patch vhost-user-gpu-abstract-vg_cleanup_mappi.patch vhost-user-gpu-fix-leak-in-virgl_cmd_res.patch vhost-user-gpu-fix-leak-in-virgl_resourc.patch vhost-user-gpu-fix-memory-disclosure-in-.patch vhost-user-gpu-fix-memory-leak-in-vg_res.patch vhost-user-gpu-fix-memory-leak-while-cal.patch vhost-user-gpu-fix-OOB-write-in-virgl_cm.patch vhost-user-gpu-fix-resource-leak-in-vg_r.patch vhost-vdpa-don-t-initialize-backend_feat.patch virtio-blk-Fix-rollback-path-in-virtio_b.patch virtio-Fail-if-iommu_platform-is-request.patch virtiofsd-Fix-side-effect-in-assert.patch vl-allow-not-specifying-size-in-m-when-u.patch vl-Fix-an-assert-failure-in-error-path.patch vl-plug-object-back-into-readconfig.patch vl-plumb-keyval-based-options-into-readc.patch x86-acpi-use-offset-instead-of-pointer-w.patch - usb: unbounded stack allocation in usbredir (bsc#1186012, CVE-2021-3527) hw-usb-Do-not-build-USB-subsystem-if-not.patch hw-usb-host-stub-Remove-unused-header.patch usb-hid-avoid-dynamic-stack-allocation.patch usb-limit-combined-packets-to-1-MiB-CVE-.patch usb-mtp-avoid-dynamic-stack-allocation.patch - usbredir: free call on invalid pointer in bufp_alloc (bsc#1189145, CVE-2021-3682) usbredir-fix-free-call.patch - Add stable patches from upstream: block-nvme-Fix-VFIO_MAP_DMA-failed-No-sp.patch hw-net-can-sja1000-fix-buff2frame_bas-an.patch hw-pci-host-q35-Ignore-write-of-reserved.patch - Disabled skiboot building for PowerPC due to the following issue: https://github.com/open-power/skiboot/issues/265 - Fix possible mremap overflow in the pvrdma (CVE-2021-3582, bsc#1187499) hw-rdma-Fix-possible-mremap-overflow-in-.patch - Ensure correct input on ring init (CVE-2021-3607, bsc#1187539) pvrdma-Ensure-correct-input-on-ring-init.patch - Fix the ring init error flow (CVE-2021-3608, bsc#1187538) pvrdma-Fix-the-ring-init-error-flow-CVE-.patch - Fix qemu-supportconfig network-manager verification - Fix stable issues found in upstream: hmp-Fix-loadvm-to-resume-the-VM-on-succe.patch hw-block-nvme-align-with-existing-style.patch hw-nvme-fix-missing-check-for-PMR-capabi.patch hw-nvme-fix-pin-based-interrupt-behavior.patch linux-user-aarch64-Enable-hwcap-for-RND-.patch qemu-config-load-modules-when-instantiat.patch qemu-config-parse-configuration-files-to.patch qemu-config-use-qemu_opts_from_qdict.patch runstate-Initialize-Error-to-NULL.patch target-i386-Exit-tb-after-wrmsr.patch tcg-Allocate-sufficient-storage-in-temp_.patch tcg-sparc-Fix-temp_allocate_frame-vs-spa.patch vhost-vdpa-don-t-initialize-backend_feat.patch vl-allow-not-specifying-size-in-m-when-u.patch vl-Fix-an-assert-failure-in-error-path.patch vl-plug-object-back-into-readconfig.patch vl-plumb-keyval-based-options-into-readc.patch x86-acpi-use-offset-instead-of-pointer-w.patch - Update qemu-supportconfig plugin - Fix an update-alternative warning when removing qemu-skiboot package bsc#1178678 - Use doc directive to build QEMU documentation - Improve compatibility with gcc 11: target-sh4-Return-error-if-CPUClass-get_.patch tcg-arm-Fix-tcg_out_op-function-signatur.patch - Enable zstd compression option to qcow2 - Fix out-of-bounds write in virgl_cmd_get_capset CVE-2021-3546 bsc#1185981 vhost-user-gpu-abstract-vg_cleanup_mappi.patch - Fix memory leaks found in the virtio vhost-user GPU device CVE-2021-3544 bsc#1186010 vhost-user-gpu-fix-leak-in-virgl_cmd_res.patch vhost-user-gpu-fix-leak-in-virgl_resourc.patch vhost-user-gpu-fix-memory-disclosure-in-.patch vhost-user-gpu-fix-memory-leak-in-vg_res.patch vhost-user-gpu-fix-memory-leak-while-cal.patch vhost-user-gpu-fix-OOB-write-in-virgl_cm.patch - Fix information disclosure due to uninitialized memory read CVE-2021-3545 bsc#1185990 vhost-user-gpu-fix-resource-leak-in-vg_r.patch - disable sheepdog, it was dropped upstream ( https://gitlab.com/qemu-project/qemu/-/commit/09ec85176e4095be15f233ebc870d5680123f024) and fails to build with gcc 11 on non-x86 - Fix CVE-2021-3527 in usb/redir: usb-redir-avoid-dynamic-stack-allocation.patch - Fix issues found upstream: hw-block-nvme-consider-metadata-read-aio.patch sockets-update-SOCKET_ADDRESS_TYPE_FD-li.patch vfio-ccw-Permit-missing-IRQs.patch vhost-user-blk-Check-that-num-queues-is-.patch vhost-user-blk-Don-t-reconnect-during-in.patch vhost-user-blk-Fail-gracefully-on-too-la.patch vhost-user-blk-Get-more-feature-flags-fr.patch vhost-user-blk-Make-sure-to-set-Error-on.patch virtio-blk-Fix-rollback-path-in-virtio_b.patch virtio-Fail-if-iommu_platform-is-request.patch virtiofsd-Fix-side-effect-in-assert.patch monitor-qmp-fix-race-on-CHR_EVENT_CLOSED.patch - Brotli VLA error was already fixed in v5.2 but the patches wasn't included in v6.0. This change fixed that - Patches added: brotli-fix-actual-variable-array-paramet.patch hw-rx-rx-gdbsim-Do-not-accept-invalid-me.patch ui-Fix-memory-leak-in-qemu_xkeymap_mappi.patch - For the record, these issues are fixed in this package already. Most are alternate references to previously mentioned issues: (CVE-2019-15890, bsc#1149813, CVE-2020-8608, bsc#1163019, CVE-2020-14364, bsc#1175534, CVE-2020-25707, bsc#1178683, CVE-2020-25723, bsc#1178935, CVE-2020-29130, bsc#1179477, CVE-2020-29129, bsc#1179484, CVE-2021-3419, bsc#1182975) - Update to v6.0: see https://wiki.qemu.org/ChangeLog/6.0 For a full list of formely deprecated features that are removed now, consult: https://qemu-project.gitlab.io/qemu/system/removed-features.html. For a list of new deprecated features, consult: https://qemu-project.gitlab.io/qemu/system/deprecated.html Some noteworthy changes: * Removed tileGX CPU (linux-user mode). * Removed ide-drive device (use ide-hd or ide-cd instead). * Removed scsi-disk device (use scsi-hd or scsi-cd instead). * Removed pc-1.0, pc-1.1, pc-1.2, and pc-1.3 machine types. * Added emulation of Arm-v8.1M arch and Cortex-M55 CPU. * Added boards mps3-an524 (Cortex-M33) and mps3-an547 (Cortex-M55). * x86: Support for running SEV-ES encrypted guests; TCG can emulate the PKS feature; WHPX accelerator supports accelerated APIC. * ARM: ARMv8.4-TTST, ARMv8.4-SEL2, FEAT_SSBS, and ARMv8.4-DIT emulation are now supported; Added ARMv8.5-MemTag extension is now supported formely linux-user. Additional device emulation support for xlnx-zynqmp, xlnx-versal, sbsa-ref, npcm7xx, and sabrelite board models. * PowerPC: powernv now allows external BMC; pseries can send QAPI message if it detects a memory hotplug failure; CPU unplug request can be retried. * s390: TCG works with Linux kernels built with clang-11 and clang12. * RISC-V: OpenSBI upgraded to v0.9; Support the QMP dump-guest-memory command; Add support for the SiFive SPI controller (sifive_u); Add QSPI NOR flash to Microchip PFSoC. * Misc doc improvements. * Multiprocess: Add experimental options to support out-of-process device emulation. * ACPI: support for assigning NICs to known names in guest OS independently of PCI slot placement. * NVMe: new emulation support for v1.4 spec with many new features, experimental support for Zoned Namespaces, multipath I/O, and End-to-End Data Protection. * Xen: New guest loader for testing of Xen-like hypervisors booting kernels. * virtiofs: misc. security fixes and performance improvements. * Tools: FUSE block exports to allow mounting any QEMU block device node as a host file. * Migration: query/info-migrate now display the migration blocker status and the reasons for blocking. * User-mode: Added support for the Qualcomm Hexagon processor. * TCG: Added support for Apple Silicon hosts (macOS). * QMP: backup jobs now support multiple asynchronous requests in parallel * VNC: virtio-vga support for scaling resolution based on client window size * Patches added: doc-add-our-support-doc-to-the-main-proj.patch * Patches removed: 9pfs-Fully-restart-unreclaim-loop-CVE-20.patch audio-add-sanity-check.patch block-Fix-deadlock-in-bdrv_co_yield_to_d.patch block-Fix-locking-in-qmp_block_resize.patch blockjob-Fix-crash-with-IOthread-when-bl.patch block-nfs-fix-int-overflow-in-nfs_client.patch block-rbd-fix-memory-leak-in-qemu_rbd_co.patch block-rbd-Fix-memory-leak-in-qemu_rbd_co.patch block-Separate-blk_is_writable-and-blk_s.patch block-Simplify-qmp_block_resize-error-pa.patch brotli-fix-actual-variable-array-paramet.patch build-no-pie-is-no-functional-linker-fla.patch cadence_gem-switch-to-use-qemu_receive_p.patch cpu-core-Fix-help-of-CPU-core-device-typ.patch docs-add-SUSE-support-statements-to-html.patch dp8393x-switch-to-use-qemu_receive_packe.patch e1000-fail-early-for-evil-descriptor.patch e1000-switch-to-use-qemu_receive_packet-.patch hw-arm-virt-acpi-build-Fix-GSIV-values-o.patch hw-arm-virt-Disable-pl011-clock-migratio.patch hw-block-fdc-Fix-fallback-property-on-sy.patch hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch hw-isa-Kconfig-Add-missing-dependency-VI.patch hw-isa-piix4-Migrate-Reset-Control-Regis.patch hw-net-lan9118-Fix-RX-Status-FIFO-PEEK-v.patch hw-s390x-fix-build-for-virtio-9p-ccw.patch hw-sd-sd-Actually-perform-the-erase-oper.patch hw-sd-sd-Fix-build-error-when-DEBUG_SD-i.patch hw-sd-sdhci-Correctly-set-the-controller.patch hw-sd-sdhci-Don-t-transfer-any-data-when.patch hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-re.patch hw-sd-sdhci-Limit-block-size-only-when-S.patch hw-sd-sdhci-Reset-the-data-pointer-of-s-.patch hw-sd-sd-Move-the-sd_block_-read-write-a.patch hw-sd-sd-Skip-write-protect-groups-check.patch hw-timer-slavio_timer-Allow-64-bit-acces.patch hw-virtio-pci-Added-AER-capability.patch hw-virtio-pci-Added-counter-for-pcie-cap.patch i386-acpi-restore-device-paths-for-pre-5.patch iotests-Fix-_send_qemu_cmd-with-bash-5.1.patch lan9118-switch-to-use-qemu_receive_packe.patch lsilogic-Use-PCIDevice-exit-instead-of-D.patch Make-keycode-gen-output-reproducible-use.patch memory-clamp-cached-translation-in-case-.patch monitor-Fix-assertion-failure-on-shutdow.patch mptsas-Remove-unused-MPTSASState-pending.patch msf2-mac-switch-to-use-qemu_receive_pack.patch net-Fix-handling-of-id-in-netdev_add-and.patch net-introduce-qemu_receive_packet.patch pcnet-switch-to-use-qemu_receive_packet-.patch qemu-nbd-Use-SOMAXCONN-for-socket-listen.patch qemu-storage-daemon-Enable-object-add.patch rtl8139-switch-to-use-qemu_receive_packe.patch s390x-add-have_virtio_ccw.patch s390x-css-report-errors-from-ccw_dstream.patch s390x-Fix-stringop-truncation-issue-repo.patch s390x-modularize-virtio-gpu-ccw.patch s390x-move-S390_ADAPTER_SUPPRESSIBLE.patch s390x-pci-restore-missing-Query-PCI-Func.patch spice-app-avoid-crash-when-core-spice-mo.patch sungem-switch-to-use-qemu_receive_packet.patch target-arm-Don-t-decode-insns-in-the-XSc.patch target-arm-Fix-MTE0_ACTIVE.patch target-arm-Introduce-PREDDESC-field-defi.patch target-arm-Update-PFIRST-PNEXT-for-pred_.patch target-arm-Update-REV-PUNPK-for-pred_des.patch target-arm-Update-ZIP-UZP-TRN-for-pred_d.patch target-xtensa-fix-meson.build-rule-for-x.patch tcg-Use-memset-for-large-vector-byte-rep.patch tools-virtiofsd-Replace-the-word-whiteli.patch tx_pkt-switch-to-use-qemu_receive_packet.patch ui-vnc-Add-missing-lock-for-send_color_m.patch update-linux-headers-Include-const.h.patch Update-linux-headers-to-5.11-rc2.patch util-fix-use-after-free-in-module_load_o.patch vfio-ccw-Connect-the-device-request-noti.patch vhost-user-blk-fix-blkcfg-num_queues-end.patch viriofsd-Add-support-for-FUSE_HANDLE_KIL.patch virtiofsd-extract-lo_do_open-from-lo_ope.patch virtiofsd-optionally-return-inode-pointe.patch virtiofsd-prevent-opening-of-special-fil.patch virtiofs-drop-remapped-security.capabili.patch virtiofsd-Save-error-code-early-at-the-f.patch virtio-move-use-disabled-flag-property-t.patch virtio-pci-compat-page-aligned-ATS.patch xen-block-Fix-removal-of-backend-instanc.patch - Include upstream patch designated as stable material and reviewed for applicability to include here mptsas-Remove-unused-MPTSASState-pending.patch - Clarify in support documents that cpu-add was removed in this release from both the human monitor protocol (HMP) and QMP interfaces - 6.0.0 qemu is about to be released. Add comments to the in- package support documents (supported..txt) about the new deprecations as of that release as an early head's up for qemu users. These deprecations include these command-line options: - M option: kernel-irqchip=off - chardev tty - chardev paraport - enable-fips - writeconfig - spice password=string - Include upstream patches designated as stable material and reviewed for applicability to include here. NOTE that the PIIX4 patch has migration implications: the change will also be applied to the SLE-15-SP2 qemu, and a live migration from that version to this SLE-15-SP3 qemu would require this patch to be applied for a successful migration if PIIX4 southbridge is used in the machine emulation (x86 i440fx) block-rbd-fix-memory-leak-in-qemu_rbd_co.patch block-rbd-Fix-memory-leak-in-qemu_rbd_co.patch cpu-core-Fix-help-of-CPU-core-device-typ.patch hw-arm-virt-acpi-build-Fix-GSIV-values-o.patch hw-block-fdc-Fix-fallback-property-on-sy.patch hw-isa-Kconfig-Add-missing-dependency-VI.patch hw-isa-piix4-Migrate-Reset-Control-Regis.patch hw-virtio-pci-Added-AER-capability.patch hw-virtio-pci-Added-counter-for-pcie-cap.patch s390x-css-report-errors-from-ccw_dstream.patch target-xtensa-fix-meson.build-rule-for-x.patch util-fix-use-after-free-in-module_load_o.patch virtio-pci-compat-page-aligned-ATS.patch - Switch method of splitting off hw-s390x-virtio-gpu-ccw.so as a module to what was accepted upstream (bsc#1181103) * Patches dropped: hw-s390x-modularize-virtio-gpu-ccw.patch * Patches added: s390x-add-have_virtio_ccw.patch s390x-modularize-virtio-gpu-ccw.patch s390x-move-S390_ADAPTER_SUPPRESSIBLE.patch - Fix OOB access in sdhci interface (CVE-2020-17380, bsc#1175144, CVE-2020-25085, bsc#1176681, CVE-2021-3409, bsc#1182282) hw-sd-sd-Actually-perform-the-erase-oper.patch hw-sd-sd-Fix-build-error-when-DEBUG_SD-i.patch hw-sd-sdhci-Correctly-set-the-controller.patch hw-sd-sdhci-Don-t-transfer-any-data-when.patch hw-sd-sdhci-Don-t-write-to-SDHC_SYSAD-re.patch hw-sd-sdhci-Limit-block-size-only-when-S.patch hw-sd-sdhci-Reset-the-data-pointer-of-s-.patch hw-sd-sd-Move-the-sd_block_-read-write-a.patch hw-sd-sd-Skip-write-protect-groups-check.patch - Fix potential privilege escalation in virtiofsd tool (CVE-2021-20263, bsc#1183373) tools-virtiofsd-Replace-the-word-whiteli.patch viriofsd-Add-support-for-FUSE_HANDLE_KIL.patch virtiofsd-extract-lo_do_open-from-lo_ope.patch virtiofsd-optionally-return-inode-pointe.patch virtiofsd-prevent-opening-of-special-fil.patch virtiofs-drop-remapped-security.capabili.patch virtiofsd-Save-error-code-early-at-the-f.patch - Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968) net-introduce-qemu_receive_packet.patch rtl8139-switch-to-use-qemu_receive_packe.patch - Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416) cadence_gem-switch-to-use-qemu_receive_p.patch dp8393x-switch-to-use-qemu_receive_packe.patch e1000-switch-to-use-qemu_receive_packet-.patch lan9118-switch-to-use-qemu_receive_packe.patch msf2-mac-switch-to-use-qemu_receive_pack.patch pcnet-switch-to-use-qemu_receive_packet-.patch sungem-switch-to-use-qemu_receive_packet.patch tx_pkt-switch-to-use-qemu_receive_packet.patch - Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686) memory-clamp-cached-translation-in-case-.patch - Include upstream patches designated as stable material and reviewed for applicability to include here hw-arm-virt-Disable-pl011-clock-migratio.patch xen-block-Fix-removal-of-backend-instanc.patch - Fix package scripts to not use hard coded paths for temporary working directories and log files (bsc#1182425) - Fix s390x "mediated device is in use" error condition (bsc#1183634) update-linux-headers-Include-const.h.patch Update-linux-headers-to-5.11-rc2.patch vfio-ccw-Connect-the-device-request-noti.patch - Fix DoS in e1000 emulated device (CVE-2021-20257 bsc#1182577) e1000-fail-early-for-evil-descriptor.patch - Fix incorrect guest data in s390x PCI passthrough (bsc#1183372) s390x-pci-restore-missing-Query-PCI-Func.patch - Include upstream patches designated as stable material and reviewed for applicability to include here lsilogic-Use-PCIDevice-exit-instead-of-D.patch vhost-user-blk-fix-blkcfg-num_queues-end.patch - Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137) 9pfs-Fully-restart-unreclaim-loop-CVE-20.patch - Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639) net-vmxnet3-validate-configuration-value.patch - Add #!ForceMultiversion to qemu.spec: + As the spec file defines different Version: fiels for various subpackages, we must instruct OBS to not ever reset the checkin-counter, as it would by defalut on a version increase. Resetting the version counter results in sub-packages reusing their VERSION-RELEASE from the past (e.g. qemu-ipxe is version 1.0.0+, and upon checkin of a new qemu version, RELEASE is reset to 1.1, thus again producing qemu-ipxe-1.0.0+-1.1.noarch.rpm. - Fix GCC11 compiler issue in brotli (edk2) code (boo#1181922) brotli-fix-actual-variable-array-paramet.patch - Tweak a few submodule descriptions and summaries - Fix a backward compatibility issue in ACPI data i386-acpi-restore-device-paths-for-pre-5.patch - Add patch from IBM to improve modularization situation on s390 where a new qemu module, hw-s390x-virtio-gpu-ccw.so, and a corresponding new qemu-hw-s390x-virtio-gpu-ccw subpackage, is split out (this parallels the hw-display-virtio-gpu-pci.so module). Split-provides file is also used to track this functionality splitout. Both the packages supplying the above mentioned modules now have a Requires on the qemu-hw-display-virtio-gpu package. It is anticipated that this change is going in upstream as well, and if done differently the plan is to update to the upstream implementation if possible (bsc#1181103) hw-s390x-modularize-virtio-gpu-ccw.patch - Added a few more usability improvements for our git packaging workflow - Fix issue of virtio-9p-ccw having been mistakenly dropped from qemu (bsc#1182496) hw-s390x-fix-build-for-virtio-9p-ccw.patch - Tweaked some spec file details to be again compatible with quilt setup using the spec file as input - Remove BuildRequires that were added in anticipation of building ovmf within this package. We have not taken that route - Fix uninitialized variable in ipxe driver code (boo#1181922) ath5k-Add-missing-AR5K_EEPROM_READ-in-at.patch - Add a few improvements to the git-based package workflow scripts - Include additional upstream patches designated as stable material and reviewed for applicability to include here blockjob-Fix-crash-with-IOthread-when-bl.patch monitor-Fix-assertion-failure-on-shutdow.patch qemu-nbd-Use-SOMAXCONN-for-socket-listen.patch qemu-storage-daemon-Enable-object-add.patch - Switch the modules qemu-ui-display-gpu and qemu-ui-display-gpu-pci from being an x86 only Recommends, to a Recommends for all arch's except s390x (boo#1181350) - Fix qemu-hw-usb-smartcard to not be a Recommends for s390x - Minor spec file tweaks for compatibility with upcoming spec file formatter - Make note that this patch takes care of an OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933) hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch - Include upstream patches designated as stable material and reviewed for applicability to include here block-Separate-blk_is_writable-and-blk_s.patch hw-intc-arm_gic-Fix-interrupt-ID-in-GICD.patch hw-net-lan9118-Fix-RX-Status-FIFO-PEEK-v.patch hw-timer-slavio_timer-Allow-64-bit-acces.patch net-Fix-handling-of-id-in-netdev_add-and.patch target-arm-Don-t-decode-insns-in-the-XSc.patch target-arm-Fix-MTE0_ACTIVE.patch target-arm-Introduce-PREDDESC-field-defi.patch target-arm-Update-PFIRST-PNEXT-for-pred_.patch target-arm-Update-REV-PUNPK-for-pred_des.patch target-arm-Update-ZIP-UZP-TRN-for-pred_d.patch tcg-Use-memset-for-large-vector-byte-rep.patch ui-vnc-Add-missing-lock-for-send_color_m.patch virtio-move-use-disabled-flag-property-t.patch - binutils v2.36 has changed the handling of the assembler's - mx86-used-note, resulting in a build failure. To compensate, we now explicitly specify -mx86-used-note=no in the seabios Makefile (boo#1181775) build-be-explicit-about-mx86-used-note-n.patch - Additional tweaks to ensure libvirt runs ok when qemu-hw-display-virtio-gpu package is not installed - Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid "Failed to try-restart qemu-ga@.service" error while updating the qemu-guest-agent. (bsc#1178565) - Fix two additional cases of qemu crashing due to qemu module packages not being loaded. qom-handle-case-of-chardev-spice-module-.patch spice-app-avoid-crash-when-core-spice-mo.patch - Fix issue of qemu crashing (abort called) when virtio-gpu device is asked for and the qemu-hw-display-virtio-gpu package isn't installed. (bsc#1181103) module-for-virtio-gpu-pre-load-module-to.patch - Add additional inter-module package dependencies, to reflect the current module dependencies (see qemu source file: util/module.c) - As of v3.1.0 virt-manager, new VM's are created by default with audio/sound enabled, so it's time to reflect the need, at least in the spice case, by having spice-audio available when spice in general is used (boo#1180210 boo#1181132) - Further refine package Recommends/Suggests based on architecture - Remove no longer needed dependency on pwdutils (boo#1181235) - Fix qemu-testsuite issue where white space processing gets handled differently under bash 5.1 (boo#1181054) iotests-Fix-_send_qemu_cmd-with-bash-5.1.patch - Convert qemu-kvm from a script to a symlink. Using qemu-kvm to invoke the QEMU emulator has been deprecated for some time, but is still provided. It has as it's ancient origins a version of QEMU which had KVM acceleration enabled by default, and then recently, until now, it is a shell script which execs the QEMU emulator, adding '-machine accel=kvm' to the beginning of the list of command line options passed to the emulator. This method collides with the now preferred method of specifying acceleration options by using -accel. qemu-kvm is now changed to simply be a symlink to the same QEMU binary which the prior script exec'd. This new approach takes advantage of a built-in QEMU feature where if QEMU is invoked using a program name ending in 'kvm', KVM emulation is enabled. This approach is better in that it is more compatible with any other command line option that may be added for describing acceleration. For those who have modified qemu-kvm to add additional command line options, or take other actions in the context of the script you will now need to create an alternate script "emulator" to achieve the same result. Note that it's possible there may be some very subtle behavioral difference in the switch from a script to a symlink, but given that qemu-kvm is a deprecated package, we're not going to worry about that. - Fix crash when spice used and the qemu-audio-spice package isn't installed (boo#1180210) audio-add-sanity-check.patch - Add some stable patches from upstream block-Fix-deadlock-in-bdrv_co_yield_to_d.patch block-Fix-locking-in-qmp_block_resize.patch block-nfs-fix-int-overflow-in-nfs_client.patch block-Simplify-qmp_block_resize-error-pa.patch build-no-pie-is-no-functional-linker-fla.patch - Update to v5.2.0: See http://wiki.qemu.org/ChangeLog/5.2 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in the deprecated.html file installed with the qemu package Some noteworthy changes: * Dropped system emulators: qemu-system-lm32, qemu-system-unicore32 * Dropped linux user emulator: qemu-ppc64abi32 * Added linux user emulator: qemu-extensaeb * Unicore32 and lm32 guest support dropped * New sub-packages (most due to ongoing modularization of QEMU): qemu-audio-spice, qemu-hw-chardev-spice, qemu-hw-display-virtio-vga, qemu-hw-display-virtio-gpu, qemu-hw-display-virtio-gpu-pci, qemu-ui-spice-core, qemu-ui-opengl, qemu-ivshmem-tools * x86: A new KVM feature which improves the handling of asynchronous page faults is available with -cpu ...,kvm-async-pf-int (requires Linux 5.8) * s390: More instructions emulated under TCG * PowerPC: nvdimm= machine option now functions correctly; misc improvements * ARM: new boards: mps2-an386 (Cortex-M4 based) and mps2-an500 (Cortex-M7 based), raspi3ap (the Pi 3 model A+), raspi0 (the Pi Zero) and raspi1ap (the Pi A+) * RISC-V: OpenSBI v0.8 included by default; Generic OpenSBI platform used when no -bios argument is supplied; Support for NUMA sockets on Virt and Spike Machines; Support for migrating machines; misc improvements * Misc NVMe improvements * The 'vhost-user-blk' export type has been added, allowing qemu-storage-daemon to act as a vhost-user-blk device backend * The SMBIOS OEM strings can now come from a file * 9pfs - misc performance related improvements * virtiofs - misc improvements * migration: The default migration bandwidth has been increased to 1Gbps (users are still encouraged to tune it to their own hardware); The new 'calc-dirty-rate' and 'query-dirty-rate' QMP commands can help determine the likelihood of precopy migration success; TLS+multifd now supported for higher bandwidth encrypted migration; misc minor features added * Misc minor block features added * Misc doc improvements * qemu-microvm subpackage change: the bios-microvm.bin is now SeaBIOS based, and the qboot based on is now qboot.rom * elf2dmp is no longer part of qemu-tools (it was never intended to be a packaged binary) * Some subpackages which were 'Requires' are now 'Recommends', allowing for a smaller qemu packaging footprint if needed * Patches dropped (included in release tarball, unless otherwise noted): docs-fix-trace-docs-build-with-sphinx-3..patch (fixed differently) hw-hyperv-vmbus-Fix-32bit-compilation.patch linux-user-properly-test-for-infinite-ti.patch Switch-order-of-libraries-for-mpath-supp.patch (fixed differently) Conditionalize-ui-bitmap-installation-be.patch (fixed differently) hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch (no longer using gcc9) hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch (no longer using gcc9) roms-Makefile-enable-cross-compile-for-b.patch (fixed with different patch) libvhost-user-handle-endianness-as-manda.patch virtio-add-vhost-user-fs-ccw-device.patch Fix-s-directive-argument-is-null-error.patch build-Workaround-compilation-error-with-.patch build-Be-explicit-about-fcommon-compiler.patch intel-Avoid-spurious-compiler-warning-on.patch golan-Add-explicit-type-casts-for-nodnic.patch Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch ensure-headers-included-are-compatible-w.patch Enable-cross-compile-prefix-for-C-compil.patch (fixed differently) hw-net-net_tx_pkt-fix-assertion-failure-.patch hw-net-xgmac-Fix-buffer-overflow-in-xgma.patch s390x-protvirt-allow-to-IPL-secure-guest.patch usb-fix-setup_len-init-CVE-2020-14364.patch * Patches added: meson-install-ivshmem-client-and-ivshmem.patch Revert-roms-efirom-tests-uefi-test-tools.patch Makefile-Don-t-check-pc-bios-as-pre-requ.patch roms-Makefile-add-cross-file-to-qboot-me.patch qboot-add-cross.ini-file-to-handle-aarch.patch usb-Help-compiler-out-to-avoid-a-warning.patch - In spec file, where reasonable, switch BuildRequires: XXX-devel to be pkgconfig(XXX') instead - No longer disable link time optimization for qemu for x86. It looks like either the build service, qemu code changes and/or the switch to meson have resolved issues previously seen there. We still see problems for other architectures however. - For the record, the following issues reported for SUSE SLE15-SP2 are either fixed in this current package, or are otherwise no longer an issue: bsc#1172384 bsc#1174386 bsc#1174641 bsc#1174863 bsc#1175370 bsc#1175441 bsc#1176494 CVE-2020-13361 CVE-2020-14364 CVE-2020-15863 CVE-2020-16092 CVE-2020-24352 and the following feature requests are satisfied by this package: jsc#SLE-13689 jsc#SEL-13780 jsc#SLE-13840 - To be more accurate, and to align with other qemu packaging practices, rename the qemu-s390 package to qemu-s390x. The old name (in the rpm namespace) is provided with a "Provides" directive, and an "Obsoletes" done against that name for prior qemu versions, as is standard practice (boo#1177764 jsc#SLE-17060) - Take this opportunity to remove some ancient Split-Provides mechanisms which can't conceivably be needed any more: qemu-block-curl provided: qemu:%_libdir/%name/block-curl.so qemu-guest-agent provided: qemu:%_bindir/qemu-ga qemu-tools provided: qemu:%_libexecdir/qemu-bridge-helper - Disable linux-user 'ls' test on 32 bit arm. It's failing with "Allocating guest commpage: Cannot allocate memory" error, which we should hunt down, but for now we don't want it to prevent the package from being built - Be more careful about what directives are used for qemu-testsuite - Fix some spec file 'Requires' statements to be accurate to the new model of relying on system-user-qemu and system-group-kvm to provide the needed users and groups - Added io_uring support. - A patch has been applied to virt-manager to handle qemu spice related modules not being present, so undo the change from Sep 30, 2020. Once again qemu-hw-display-qxl and qemu-hw-usb-redirect are Recommends and not Required by the qemu package (boo#1157320 boo#1176517, boo#1178141) - For jsc#SLE-11629, change qemu, qemu-tools, and qemu-guest-agent to rely on system-user-qemu and system-group-kvm to provide now static system UIDs and GID's for qemu user and group, and kvm group. This will make guest migration more seamless for new installations since there is no chance of having required ID's differ in value. - Add virtio-fs support for s390x (jsc#SLE-13822) libvhost-user-handle-endianness-as-manda.patch virtio-add-vhost-user-fs-ccw-device.patch - Note: As part of the "Close the Leap Gap" effort, it's been decided that our SDL2 support in qemu is not worth trying to maintain. Long ago SLE qemu stopped including SDL2 support and now we will do the same for the openSUSE releases going forward. Accordingly SDL2 options are now configured out, and the two sub- packages which are SDL2 specific, namely qemu-audio-sdl and qemu-ui-sdl, are no longer generated, and due to the rpm package conflicts used for those packages, they will be uninstalled from systems as qemu updates move forward - Drop e2fsprogs-devel and libpcap-devel as BuildRequires packages. They have not actually been needed to build qemu for a very long time - Add more forsplits files - Create qemu-skiboot sub-package. Use update-alternatives mechanism to coordinate with opal-firmware (provided with skiboot package set) on the provider of the /usr/share/qemu/skiboot.lid firmware file. qemu-skiboot uses a priority of 15, while opal-firmware uses a priority of 10 (jsc#SLE-13240) - Undo part of the split-provides recently done. We have to wait on virt-manager to handle qemu modularization better before we make qemu-hw-display-qxl and qemu-hw-usb-redirect non-required (boo#1157320 boo#1176517) - Fix spec file, where a conditional macro didn't have the correct syntax (bsc#1176766) - Change qemu-x86 packaging relationship with qemu-microvm from Requires to Recommends - In an effort to "Close the Leap Gap", remove use of is_opensuse from the spec file, so that the same packages built for SLE can be reused for Leap. Some sub-packages will not be included for SLE which are included for Leap. They wil be provided in Package Hub for SLE users as unsupported packages. (jsc#SLE-11660, jsc#SLE-11661, jsc#SLE-11662, jsc#SLE-11691, jse#SLE-11692, jsc#SLE-11894) - Add infrastructure to do package splits when split-off package isn't required and doesn't (otherwise) include any previously installed files. This version of qemu has split out non-essential functionality into loadable modules, as noted in Aug 20, 2020 log entry, which describes the emergency Split-Provides. That approach will be superseded by this planned approach, and those dummy doc files will be removed in time Here is the new mapping: subpackage continuity file provided (files are dummies) ========== ============================================ qemu-chardev-baum /usr/share/qemu/forsplits/00 qemu-hw-display-qxl /usr/share/qemu/forsplits/01 qemu-hw-usb-redirect /usr/share/qemu/forsplits/02 qemu-hw-usb-smartcard /usr/share/qemu/forsplits/03 - Fix path of qemu-pr-helper. It was a mistake to move it from %_bindir to _libexecdir. In more recent qemu code it's been moved back, so undo this mistake by providing it at the same location as it has been all along - For SLE15-SP3, note that this update to v5.1.0 is a step towards fulfilling jsc#SLE-13689, which asks for qemu v5.2.0 or higher - Fix some shell syntax in update_git.sh, esp. an issue exposed by the most recent patch added - Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441) usb-fix-setup_len-init-CVE-2020-14364.patch - Re-sync openSUSE and SUSE SLE qemu packages. This changes file is the openSUSE one with this entry providing the intervening SLE CVE, JIRA, and bugzilla references, which are still addressed in this package, and not yet called out in this changes file. * CVE-2020-1983 CVE-2020-10761 CVE-2020-13361 CVE-2020-13362 CVE-2020-13659 CVE-2020-13800 * bsc#1167816 bsc#1170940 boo#1171712 bsc#1172383 bsc#1172384 bsc#1172386 bsc#1172495 bsc#1172710 * Patches dropped (SLE) (included in current release tarball): exec-set-map-length-to-zero-when-returni.patch i386-acpi-Remove-_HID-from-the-SMBus-ACP.patch megasas-use-unsigned-type-for-reply_queu.patch - Fix compilation errors seen with pre-release gcc 11 qht-Revert-some-constification-in-qht.c.patch Revert-qht-constify-qht_statistics_init.patch help-compiler-out-by-initializing-array.patch s390x-Fix-stringop-truncation-issue-repo.patch - Add Split-Provides mechanism, using doc files which were moved in v5.1.0. This allows for the new subpackages to be selected for install when the v5.0.0 qemu is updated. These new subpackages are not marked as "Required" by any packages, in an effort to reduce the dependencies of the core qemu components (boo#1175320) v5.0.0 qemu file mapping is provided as follows: subpackage continuity file provided (files are dummies) ========== ============================================ qemu-chardev-baum /usr/share/doc/packages/qemu/qemu-ga-ref.html qemu-hw-display-qxl /usr/share/doc/packages/qemu/qemu-ga-ref.txt qemu-hw-usb-redirect /usr/share/doc/packages/qemu/qemu-qmp-ref.html qemu-hw-usb-smartcard /usr/share/doc/packages/qemu/qemu-qmp-ref.txt - Fix wrong usage of %{_libexecdir} for systemd owned paths below %{_prefix}/lib. - Update to v5.1.0: See http://wiki.qemu.org/ChangeLog/5.1 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in the deprecated.html file installed with the qemu package Some noteworthy changes: * s390: Protected virtualization (secure execute) is fully merged upstream * s390: vfio-ccw devices no longer require setting the allow prefetch bit in the ORB, but is still dependent on host kernel support * s390: vfio-ccw now has basic support for relaying path state changes to the guest * PowerPC: pseries: NVDIMMs require label-size property * PowerPC: pseries: POWER10 support * PowerPC: added interface to inject POWER style NMIs * ARM: new board: sonorapass-bmc * ARM: new emulated features: ARMv8.2-TTSUXN, ARMv8.5-MemTag * ARM: Raspberry Pi boards now support a USB controller * ARM: virt board now supports hot-remove memory * RISC-V lots of improvements * qemu-img resize now requires -shrink to shrinking raw images * The mem parameter of the -numa option is no longer recognized starting with 5.1 machine types - instead use the memdev parameter * The ACPI WAET table is now exposed to guests * The max blocksize for virtual storage device is now 2 MiB * NVMe improvements * Crypto subsystem improvements * Block backends and tools: Numerous improvements and fixes * Firmware updates: SeaBIOS (essentially v1.14.0), OpenBIOS, SLOF (20200717), OpenSBI (v0.7) * Patches dropped (upstream unless otherwise noted): ati-vga-check-mm_index-before-recursive-.patch audio-fix-wavcapture-segfault.patch es1370-check-total-frame-count-against-c.patch exec-set-map-length-to-zero-when-returni.patch gcc10-maybe-uninitialized.patch hw-vfio-pci-quirks-Fix-broken-legacy-IGD.patch megasas-use-unsigned-type-for-reply_queu.patch nbd-server-Avoid-long-error-message-asse.patch ppc-spapr_caps-Don-t-disable-cap_cfpc-on.patch s390x-Add-SIDA-memory-ops.patch s390x-Add-unpack-facility-feature-to-GA1.patch s390x-Move-diagnose-308-subcodes-and-rcs.patch s390x-protvirt-Add-migration-blocker.patch s390x-protvirt-Disable-address-checks-fo.patch s390x-protvirt-Handle-SIGP-store-status-.patch s390x-protvirt-Inhibit-balloon-when-swit.patch s390x-protvirt-KVM-intercept-changes.patch s390x-protvirt-Move-diag-308-data-over-S.patch s390x-protvirt-Move-IO-control-structure.patch s390x-protvirt-Move-STSI-data-over-SIDAD.patch s390x-protvirt-SCLP-interpretation.patch s390x-protvirt-Set-guest-IPL-PSW.patch s390x-protvirt-Support-unpack-facility.patch s390x-s390-virtio-ccw-Fix-build-on-syste.patch Sync-pv.patch tests-Disable-some-block-tests-for-now.patch (no longer needed) vga-fix-cirrus-bios.patch virtiofsd-add-rlimit-nofile-NUM-option.patch virtiofsd-stay-below-fs.file-max-sysctl-.patch * Patches renamed: build-Do-not-apply-WORKAROUND_CFLAGS-for.patch - > Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch build-Fix-s-directive-argument-is-null-e.patch - > Fix-s-directive-argument-is-null-error.patch * Patches added: hw-hyperv-vmbus-Fix-32bit-compilation.patch - New subpackages, due to modularization: qemu-chardev-baum, qemu-hw-display-qxl, qemu-hw-usb-redirect, qemu-hw-usb-smartcard - Configure to use "system" libslirp and libdaxctl (libnvdimm) when available - Don't disable cap_cfpc on POWER8 by default (bsc#1174374) ppc-spapr_caps-Don-t-disable-cap_cfpc-on.patch - Updating to Sphinx v3.1.2 in Factory is exposing an issue in qemu doc sources. Fix it docs-fix-trace-docs-build-with-sphinx-3..patch - Fix DoS possibility in ati-vga emulation (CVE-2020-13800 bsc#1172495) ati-vga-check-mm_index-before-recursive-.patch - Fix DoS possibility in Network Block Device (nbd) support infrastructure (CVE-2020-10761 bsc#1172710) nbd-server-Avoid-long-error-message-asse.patch - Fix null pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386) exec-set-map-length-to-zero-when-returni.patch - Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383) megasas-use-unsigned-type-for-reply_queu.patch - Fix legacy IGD passthrough hw-vfio-pci-quirks-Fix-broken-legacy-IGD.patch - The latest gcc10 available in Factory has the fix for the issue this patch was created to avoid, so drop it build-Work-around-gcc10-bug-by-not-using.patch - Switch to upstream versions of some patches we carry add-enum-cast-to-avoid-gcc10-warning.patch - > golan-Add-explicit-type-casts-for-nodnic.patch Be-explicit-about-fcommon-compiler-direc.patch - > build-Be-explicit-about-fcommon-compiler.patch Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch - > build-Do-not-apply-WORKAROUND_CFLAGS-for.patch Fix-s-directive-argument-is-null-error.patch - > build-Fix-s-directive-argument-is-null-e.patch Workaround-compilation-error-with-gcc-9..patch - > build-Workaround-compilation-error-with-.patch work-around-gcc10-problem-with-zero-leng.patch - > intel-Avoid-spurious-compiler-warning-on.patch - Fix vgabios issue for cirrus graphics emulation, which effectively downgraded it to standard VGA behavior vga-fix-cirrus-bios.patch - Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384) es1370-check-total-frame-count-against-c.patch - Work around gcc 10 bug (boo#1172411) build-Work-around-gcc10-bug-by-not-using.patch - Now that gcc10 compatibility is figured out, remove NO_WERROR=1 again from ipxe make. - Fix segfault when doing HMP wavcapture (boo#1171712) audio-fix-wavcapture-segfault.patch - Fix DoS in virtiofsd, where a FUSE client could exhaust the number of available open files on the host (CVE-2020-10717 bsc#1171110) virtiofsd-add-rlimit-nofile-NUM-option.patch virtiofsd-stay-below-fs.file-max-sysctl-.patch - Add more fixes for gcc10 compatibility: Use NO_WERROR=1 when building ipxe sources, at least until we get gcc10 compatibility figured out. Also add patch for explicitly using -fcommon (boo#1171140) Be-explicit-about-fcommon-compiler-direc.patch and fix for tighter enum compatibility checking (boo#1171139) add-enum-cast-to-avoid-gcc10-warning.patch and a work around for what seems to be a compiler regression (boo#1171123) work-around-gcc10-problem-with-zero-leng.patch - Update to v5.0.0: See http://wiki.qemu.org/ChangeLog/5.0 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in the deprecated.html file installed with the qemu package Some noteworthy changes: * x86: EPYC-Rome vcpu model * x86: vcpu model fixes for EPYC, Denverton, and Icelake-Server * s390: (as previously mentioned) Protected Virtualization support: start and control guest in secure mode (bsc#1167075 jsc#SLE-7407) * s390: support for Adapter Interrupt Suppression while running in KVM mode * PowerPC: pseries: NVDIMMs with file backend supported * PowerPC: powernv: KVM guests now runnable under TCG emulation * PowerPC: powernv: Basic POWER10 support * ARM: new boards: tacoma-bmc, Netduindo Plus 2, Orangepi PC * ARM: 'virt' machine now supports vTPM and virtio-iommu devices * ARM:Cortex-M7 CPU support * ARM: Lots of architecture features now emulated * ARM: TPM supported * ARM: Timekeeping improvements * ARM: LOTS more - refer to upstream changelog * virtio-iommu * VNC compatibility with noVNC improved * Support for using memory backends for main/"built-in" guest RAM * hostmem backends can now specify prealloc thread count * Better Azure compatibility of VHD images * Ceph namespaces supported * Compress block filter driver can create compressed backup images * virtiofsd availble for host filesystem passthrough * Improved html based documentation is provided with this release * Live migration support for external processes running on QEMU D-Bus * Patches dropped (upstream unless otherwise noted): i386-Add-MSR-feature-bit-for-MDS-NO.patch i386-Add-macro-for-stibp.patch i386-Add-new-CPU-model-Cooperlake.patch arm-arm-powerctl-set-NSACR.-CP11-CP10-bi.patch iotests-Skip-test-060-if-it-is-not-possi.patch iotests-Skip-test-079-if-it-is-not-possi.patch Revert-qemu-options.hx-Update-for-reboot.patch iotests-Provide-a-function-for-checking-.patch Fix-double-free-issue-in-qemu_set_log_fi.patch iotests-Fix-IMGOPTSSYNTAX-for-nbd.patch virtio-blk-fix-out-of-bounds-access-to-b.patch block-Activate-recursively-even-for-alre.patch i386-Resolve-CPU-models-to-v1-by-default.patch numa-properly-check-if-numa-is-supported.patch vhost-user-gpu-Drop-trailing-json-comma.patch display-bochs-display-fix-memory-leak.patch hw-arm-smmuv3-Apply-address-mask-to-line.patch hw-arm-smmuv3-Correct-SMMU_BASE_ADDR_MAS.patch hw-arm-smmuv3-Check-stream-IDs-against-a.patch hw-arm-smmuv3-Align-stream-table-base-ad.patch hw-arm-smmuv3-Use-correct-bit-positions-.patch hw-arm-smmuv3-Report-F_STE_FETCH-fault-a.patch block-Add-bdrv_qapi_perm_to_blk_perm.patch blkdebug-Allow-taking-unsharing-permissi.patch virtio-add-ability-to-delete-vq-through-.patch virtio-update-queue-size-on-guest-write.patch virtio-don-t-enable-notifications-during.patch numa-Extend-CLI-to-provide-initiator-inf.patch numa-Extend-CLI-to-provide-memory-latenc.patch numa-Extend-CLI-to-provide-memory-side-c.patch hmat-acpi-Build-Memory-Proximity-Domain-.patch hmat-acpi-Build-System-Locality-Latency-.patch hmat-acpi-Build-Memory-Side-Cache-Inform.patch tests-numa-Add-case-for-QMP-build-HMAT.patch qcow2-bitmaps-fix-qcow2_can_store_new_di.patch backup-top-Begin-drain-earlier.patch virtio-mmio-update-queue-size-on-guest-w.patch virtio-net-delete-also-control-queue-whe.patch intel_iommu-a-fix-to-vtd_find_as_from_bu.patch target-i386-Add-new-bit-definitions-of-M.patch target-i386-Add-missed-features-to-Coope.patch hw-i386-pc-fix-regression-in-parsing-vga.patch migration-test-ppc64-fix-FORTH-test-prog.patch target-arm-Return-correct-IL-bit-in-merg.patch target-arm-Set-ISSIs16Bit-in-make_issinf.patch runstate-ignore-finishmigrate-prelaunch-.patch migration-Rate-limit-inside-host-pages.patch m68k-Fix-regression-causing-Single-Step-.patch Revert-vnc-allow-fall-back-to-RAW-encodi.patch vnc-prioritize-ZRLE-compression-over-ZLI.patch target-i386-kvm-initialize-feature-MSRs-.patch s390x-adapter-routes-error-handling.patch iscsi-Cap-block-count-from-GET-LBA-STATU.patch block-backup-fix-memory-leak-in-bdrv_bac.patch tpm-ppi-page-align-PPI-RAM.patch hw-intc-arm_gicv3_kvm-Stop-wrongly-progr.patch target-arm-fix-TCG-leak-for-fcvt-half-do.patch block-fix-memleaks-in-bdrv_refresh_filen.patch block-backup-top-fix-failure-path.patch iotests-add-test-for-backup-top-failure-.patch audio-oss-fix-buffer-pos-calculation.patch target-arm-monitor-query-cpu-model-expan.patch block-fix-crash-on-zero-length-unaligned.patch block-Fix-VM-size-field-width-in-snapsho.patch target-arm-Correct-definition-of-PMCRDP.patch block-nbd-extract-the-common-cleanup-cod.patch block-nbd-fix-memory-leak-in-nbd_open.patch virtio-crypto-do-delete-ctrl_vq-in-virti.patch virtio-pmem-do-delete-rq_vq-in-virtio_pm.patch vhost-user-blk-delete-virtioqueues-in-un.patch hw-arm-cubieboard-use-ARM-Cortex-A8-as-t.patch pc-bios-s390x-Save-iplb-location-in-lowc.patch iotests-Fix-nonportable-use-of-od-endian.patch block-qcow2-threads-fix-qcow2_decompress.patch job-refactor-progress-to-separate-object.patch block-block-copy-fix-progress-calculatio.patch block-io-fix-bdrv_co_do_copy_on_readv.patch scsi-qemu-pr-helper-Fix-out-of-bounds-ac.patch target-ppc-Fix-rlwinm-on-ppc64.patch compat-disable-edid-on-correct-virtio-gp.patch ppc-ppc405_boards-Remove-unnecessary-NUL.patch block-Avoid-memleak-on-qcow2-image-info-.patch block-bdrv_set_backing_bs-fix-use-after-.patch hmp-vnc-Fix-info-vnc-list-leak.patch migration-colo-fix-use-after-free-of-loc.patch migration-ram-fix-use-after-free-of-loca.patch qcow2-List-autoclear-bit-names-in-header.patch sheepdog-Consistently-set-bdrv_has_zero_.patch target-arm-Fix-PAuth-sbox-functions.patch tcg-i386-Fix-INDEX_op_dup2_vec.patch net-tulip-check-frame-size-and-r-w-data-.patch target-i386-do-not-set-unsupported-VMX-s.patch spapr-Fix-failure-path-for-attempting-to.patch ati-vga-Fix-checks-in-ati_2d_blt-to-avoi.patch xen-block-Fix-double-qlist-remove-and-re.patch vpc-Don-t-round-up-already-aligned-BAT-s.patch target-xtensa-fix-pasto-in-pfwait.r-opco.patch aio-wait-delegate-polling-of-main-AioCon.patch async-use-explicit-memory-barriers.patch tcg-mips-mips-sync-encode-error.patch vhost-user-gpu-Release-memory-returned-b.patch vga-Raise-VRAM-to-16-MiB-for-pc-0.15-and.patch (no pc-0.15) hw-i386-disable-smbus-migration-for-xenf.patch s390x-Don-t-do-a-normal-reset-on-the-ini.patch s390x-Move-reset-normal-to-shared-reset-.patch s390x-Move-initial-reset.patch s390x-Move-clear-reset.patch s390x-kvm-Make-kvm_sclp_service_call-voi.patch s390x-ipl-Consolidate-iplb-validity-chec.patch s390x-Beautify-diag308-handling.patch s390x-Add-missing-vcpu-reset-functions.patch s390-sclp-improve-special-wait-psw-logic.patch vhost-correctly-turn-on-VIRTIO_F_IOMMU_P.patch util-add-slirp_fmt-helpers.patch slirp-use-correct-size-while-emulating-I.patch tcp_emu-Fix-oob-access.patch slirp-use-correct-size-while-emulating-c.patch tcp_emu-fix-unsafe-snprintf-usages.patch - For SLE builds, leverage the html documentation by adding a link to the SUSE specific support documentation (the *.txt support doc was slightly tweaked to be acceptable as reStructuredText for conversion to html) docs-add-SUSE-support-statements-to-html.patch -Fix potential DoS in ATI VGA emulation (CVE-2020-11869 bsc#1170537) ati-vga-Fix-checks-in-ati_2d_blt-to-avoi.patch - Minor tweaks to patches and support doc - Add gcc10-maybe-uninitialized.patch in order to fix boo#1169728. - Include upstream patches targeted for the next stable release (bug fixes only) spapr-Fix-failure-path-for-attempting-to.patch target-i386-do-not-set-unsupported-VMX-s.patch target-xtensa-fix-pasto-in-pfwait.r-opco.patch tcg-i386-Fix-INDEX_op_dup2_vec.patch tcg-mips-mips-sync-encode-error.patch vhost-user-gpu-Release-memory-returned-b.patch vpc-Don-t-round-up-already-aligned-BAT-s.patch xen-block-Fix-double-qlist-remove-and-re.patch - Fix bug causing weak encryption in PAuth for ARM (CVE-2020-10702 bsc#1168681) target-arm-Fix-PAuth-sbox-functions.patch - Fix OOB in tulip NIC emulation (CVE-2020-11102 bsc#1168713 net-tulip-check-frame-size-and-r-w-data-.patch - Note that previously included patch addresses CVE-2020-1711 and bsc#1166240 iscsi-Cap-block-count-from-GET-LBA-STATU.patch - Include performance improvement (and related?) patch aio-wait-delegate-polling-of-main-AioCon.patch async-use-explicit-memory-barriers.patch - Rework previous patch at Olaf H.'s direction hw-i386-disable-smbus-migration-for-xenf.patch - Eliminate is_opensuse usage in producing seabios version string what we are doing here is just replacing the upstream string with one indicating that the openSUSE build service built it, and so just leave it as "-rebuilt.opensuse.org" - Alter algorithm used to produce "unique" symbol for coordinating qemu with the optional modules it may load. This is a reasonable relaxation for broader compatibility configure-remove-pkgversion-from-CONFIG_.patch - Tweak supported.*.txt for latest deprecations, and other fixes - Tweak update_git.sh, config.sh - One more fix is needed for: s390x Protected Virtualization support - start and control guest in secure mode (bsc#1167075 jsc#SLE-7407) s390x-s390-virtio-ccw-Fix-build-on-syste.patch - Include upstream patches targeted for the next stable release (bug fixes only) block-Avoid-memleak-on-qcow2-image-info-.patch block-bdrv_set_backing_bs-fix-use-after-.patch hmp-vnc-Fix-info-vnc-list-leak.patch migration-colo-fix-use-after-free-of-loc.patch migration-ram-fix-use-after-free-of-loca.patch ppc-ppc405_boards-Remove-unnecessary-NUL.patch qcow2-List-autoclear-bit-names-in-header.patch scsi-qemu-pr-helper-Fix-out-of-bounds-ac.patch sheepdog-Consistently-set-bdrv_has_zero_.patch - Note The previous set of s390x patches also includes the fix for: bsc#1167445 - Include upstream patches targeted for the next stable release (bug fixes only) block-io-fix-bdrv_co_do_copy_on_readv.patch compat-disable-edid-on-correct-virtio-gp.patch target-ppc-Fix-rlwinm-on-ppc64.patch vhost-correctly-turn-on-VIRTIO_F_IOMMU_P.patch - s390x Protected Virtualization support - start and control guest in secure mode. (note: binary patch from patch series dropped since for s390x we rebuild the patched binary anyways) (bsc#1167075 jsc#SLE-7407) s390-sclp-improve-special-wait-psw-logic.patch s390x-Add-missing-vcpu-reset-functions.patch s390x-Add-SIDA-memory-ops.patch s390x-Add-unpack-facility-feature-to-GA1.patch s390x-Beautify-diag308-handling.patch s390x-Don-t-do-a-normal-reset-on-the-ini.patch s390x-ipl-Consolidate-iplb-validity-chec.patch s390x-kvm-Make-kvm_sclp_service_call-voi.patch s390x-Move-clear-reset.patch s390x-Move-diagnose-308-subcodes-and-rcs.patch s390x-Move-initial-reset.patch s390x-Move-reset-normal-to-shared-reset-.patch s390x-protvirt-Add-migration-blocker.patch s390x-protvirt-Disable-address-checks-fo.patch s390x-protvirt-Handle-SIGP-store-status-.patch s390x-protvirt-Inhibit-balloon-when-swit.patch s390x-protvirt-KVM-intercept-changes.patch s390x-protvirt-Move-diag-308-data-over-S.patch s390x-protvirt-Move-IO-control-structure.patch s390x-protvirt-Move-STSI-data-over-SIDAD.patch s390x-protvirt-SCLP-interpretation.patch s390x-protvirt-Set-guest-IPL-PSW.patch s390x-protvirt-Support-unpack-facility.patch Sync-pv.patch - Fix the issue that s390x could not read IPL channel program when using dasd as boot device (bsc#1163140) pc-bios-s390x-Save-iplb-location-in-lowc.patch - Fix potential OOB accesses in slirp (CVE-2020-8608 bsc#1163018 bsc#1161066 CVE-2020-7039) slirp-use-correct-size-while-emulating-c.patch slirp-use-correct-size-while-emulating-I.patch tcp_emu-Fix-oob-access.patch tcp_emu-fix-unsafe-snprintf-usages.patch util-add-slirp_fmt-helpers.patch - Replace this patch with upstream version target-arm-monitor-query-cpu-model-expan.patch - Include upstream patches targeted for the next stable release (bug fixes only) audio-oss-fix-buffer-pos-calculation.patch blkdebug-Allow-taking-unsharing-permissi.patch block-Add-bdrv_qapi_perm_to_blk_perm.patch block-backup-top-fix-failure-path.patch block-block-copy-fix-progress-calculatio.patch block-fix-crash-on-zero-length-unaligned.patch block-fix-memleaks-in-bdrv_refresh_filen.patch block-Fix-VM-size-field-width-in-snapsho.patch block-nbd-extract-the-common-cleanup-cod.patch block-nbd-fix-memory-leak-in-nbd_open.patch block-qcow2-threads-fix-qcow2_decompress.patch hw-arm-cubieboard-use-ARM-Cortex-A8-as-t.patch hw-intc-arm_gicv3_kvm-Stop-wrongly-progr.patch iotests-add-test-for-backup-top-failure-.patch iotests-Fix-nonportable-use-of-od-endian.patch job-refactor-progress-to-separate-object.patch target-arm-Correct-definition-of-PMCRDP.patch target-arm-fix-TCG-leak-for-fcvt-half-do.patch tpm-ppi-page-align-PPI-RAM.patch vhost-user-blk-delete-virtioqueues-in-un.patch virtio-add-ability-to-delete-vq-through-.patch virtio-crypto-do-delete-ctrl_vq-in-virti.patch virtio-pmem-do-delete-rq_vq-in-virtio_pm.patch - Add Obsoletes directive for qemu-audio-sdl and qemu-ui-sdl since for a qemu package upgrade from SLE12-SP5, support for SDL is dropped - Fix xenfv migration from xen host with pre-v4.0 qemu. We had previously dropped a similar patch, but have decided that for now we need to go with this type of solution (bsc#1159755) hw-i386-disable-smbus-migration-for-xenf.patch - Avoid query-cpu-model-expansion crashed qemu when using machine type none, patch is queued in upstream now, will update commit id later (bsc#1159443) target-arm-monitor-query-cpu-model-expan.patch - BuildRequire pkgconfig(libudev) instead of libudev-devel: Allow OBS to shortcut through -mini flavors. - Stop using system membarriers (ie switch from --enable-membarrier to --disable-membarrier). This is a blocker for using qemu in the context of containers (boo#1130134 jsc#SLE-11089) - Drop this recently added patch - in consultation with upstream it was decided it needed to be solved a different way (bsc#1159755) hw-i386-disable-smbus-migration-for-xenf.patch - Include upstream patches targeted for the next stable release (bug fixes only) block-backup-fix-memory-leak-in-bdrv_bac.patch iscsi-Cap-block-count-from-GET-LBA-STATU.patch s390x-adapter-routes-error-handling.patch target-i386-kvm-initialize-feature-MSRs-.patch - Include upstream patches targeted for the next stable release (bug fixes only) hw-i386-pc-fix-regression-in-parsing-vga.patch m68k-Fix-regression-causing-Single-Step-.patch migration-Rate-limit-inside-host-pages.patch migration-test-ppc64-fix-FORTH-test-prog.patch Revert-vnc-allow-fall-back-to-RAW-encodi.patch runstate-ignore-finishmigrate-prelaunch-.patch target-arm-Return-correct-IL-bit-in-merg.patch target-arm-Set-ISSIs16Bit-in-make_issinf.patch vnc-prioritize-ZRLE-compression-over-ZLI.patch - BuildRequire pkconfig(systemd) instead of systemd: allow OBS to shortcut through the -mini flavors. - Use systemd_ordering in place of systemd_requires: systemd is never a strict requirement for qemu; but when installing qemu on a systemd-managed system, we want system to be present first. - Fix xenfv migration from xen host with pre-v4.0 qemu (bsc#1159755) hw-i386-disable-smbus-migration-for-xenf.patch - Create files within bundles.tar.xz with fixed timestamp and uid - Add a %bcond_without system_membarrier along with related processing to the spec file, to better investigate running QEMU with the --disable-membarrier configure option - Include upstream patches targeted for the next stable release (bug fixes only) arm-arm-powerctl-set-NSACR.-CP11-CP10-bi.patch backup-top-Begin-drain-earlier.patch block-Activate-recursively-even-for-alre.patch display-bochs-display-fix-memory-leak.patch Fix-double-free-issue-in-qemu_set_log_fi.patch hw-arm-smmuv3-Align-stream-table-base-ad.patch hw-arm-smmuv3-Apply-address-mask-to-line.patch hw-arm-smmuv3-Check-stream-IDs-against-a.patch hw-arm-smmuv3-Correct-SMMU_BASE_ADDR_MAS.patch hw-arm-smmuv3-Report-F_STE_FETCH-fault-a.patch hw-arm-smmuv3-Use-correct-bit-positions-.patch i386-Resolve-CPU-models-to-v1-by-default.patch intel_iommu-a-fix-to-vtd_find_as_from_bu.patch iotests-Fix-IMGOPTSSYNTAX-for-nbd.patch iotests-Provide-a-function-for-checking-.patch iotests-Skip-test-060-if-it-is-not-possi.patch iotests-Skip-test-079-if-it-is-not-possi.patch numa-properly-check-if-numa-is-supported.patch qcow2-bitmaps-fix-qcow2_can_store_new_di.patch Revert-qemu-options.hx-Update-for-reboot.patch vhost-user-gpu-Drop-trailing-json-comma.patch virtio-blk-fix-out-of-bounds-access-to-b.patch virtio-mmio-update-queue-size-on-guest-w.patch virtio-net-delete-also-control-queue-whe.patch virtio-update-queue-size-on-guest-write.patch - Include performance improvement virtio-don-t-enable-notifications-during.patch - Repair incorrect packaging references to Jira tracked features - Add Cooperlake vcpu model (jsc#SLE-7923) i386-Add-MSR-feature-bit-for-MDS-NO.patch i386-Add-macro-for-stibp.patch i386-Add-new-CPU-model-Cooperlake.patch target-i386-Add-new-bit-definitions-of-M.patch target-i386-Add-missed-features-to-Coope.patch - Add HMAT support (jsc#SLE-8897) (the test case for this series isn't included because we aren't set up to handle binary patches) numa-Extend-CLI-to-provide-initiator-inf.patch numa-Extend-CLI-to-provide-memory-latenc.patch numa-Extend-CLI-to-provide-memory-side-c.patch hmat-acpi-Build-Memory-Proximity-Domain-.patch hmat-acpi-Build-System-Locality-Latency-.patch hmat-acpi-Build-Memory-Side-Cache-Inform.patch tests-numa-Add-case-for-QMP-build-HMAT.patch - Update to v4.2.0: See http://wiki.qemu.org/ChangeLog/4.2 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in Appendix B of the qemu-doc.* files installed with the qemu package Some noteworthy changes: * x86: Denverton, Snowridge, and Dhyana CPU models added * x86: Latest version of all CPU models how have TSX (HLE and RTM) disabled by default * x86: Support for AVX512 BFloat16 extensions * x86: VMX features exposed more accurately and controllably * s390: TCG now implements IEP (Instruction Execution Protection) * PowerPC: POWER8 and POWER9 non-virtualized machines separated out * PowerPC: RTAS now comes from SLOF instead of QEMU itself * PowerPC: Unplug of multifunction PCI devices now unplugs the whole slot, as in x86 * ARM: Support for >256 CPUs with KVM is fixed * ARM: Memory hotplug now supported , when using UEFI, ACPI, for virt machine type * ARM: SVE support possuble now for KVM guests * ARM: ACPI generic event device can now deliver powerdown event * The backend device can be specified for a guest audio device * virtio v1.1 packed virtqueues supported * Socket based character device backends now support TCP keep-alive * Use encryption library cipher mode facilities, allowing improved performance for eg. AES-XTS encrption * Misc block device improvements, esp. with nbd - See the following few release-candidate changelog entries for additional changes related to this release - Switched package build to be out-of-tree - Update to v4.2.0-rc5: See http://wiki.qemu.org/ChangeLog/4.2 - Update to v4.2.0-rc4: See http://wiki.qemu.org/ChangeLog/4.2 * Update the support documents used for SUSE SLE releases to cover this qemu release - Update to v4.2.0-rc3: See http://wiki.qemu.org/ChangeLog/4.2 * Patches dropped (upstream unless otherwise noted): ati-add-edid-support.patch ati-vga-add-rage128-edid-support.patch ati-vga-fix-ati_read.patch ati-vga-make-i2c-register-and-bits-confi.patch ati-vga-make-less-verbose.patch ati-vga-try-vga-ddc-first.patch Disable-Waddress-of-packed-member-for-GC.patch hdata-vpd-fix-printing-char-0x00.patch target-i386-add-PSCHANGE_NO-bit-for-the-.patch target-i386-Export-TAA_NO-bit-to-guests.patch vbe-add-edid-support.patch vga-add-ati-bios-tables.patch vga-add-atiext-driver.patch vga-make-memcpy_high-public.patch vga-move-modelist-from-bochsvga.c-to-new.patch * Patches added: Enable-cross-compile-prefix-for-C-compil.patch ensure-headers-included-are-compatible-w.patch roms-Makefile-enable-cross-compile-for-b.patch * Add qemu-ui-spice-app package containing ui-spice-app.so * Add qemu-microvm package containing bios-microvm.bin - Add descriptors for the 128k and 256k SeaBios firmware images - For the record, the following issues reported for SUSE SLE15-SP1 are either fixed in this current package, or are otherwise not an issue: bsc#1079730 bsc#1098403 bsc#1111025 bsc#1128106 bsc#1133031 bsc#1134883 bsc#1135210 bsc#1135902 bsc#1136540 bsc#1136778 bsc#1138534 bsc#1140402 bsc#1143794 bsc#1145379 bsc#1144087 bsc#1145427 bsc#1145436 bsc#1145774 bsc#1146873 bsc#1149811 bsc#1152506 bsc#1155812 bsc#1156642 CVE-2018-12207 CVE-2019-5008 CVE-2019-11135 CVE-2019-12068 CVE-2019-12155 CVE-2019-13164 CVE-2019-14378 CVE-2019-15890, and the following feature requests are satisfied by this package: fate#327410 fate#327764 fate#327796 jsc#SLE-4883 jsc#SLE-6132 jsc#SLE-6237 jsc#SLE-6754 - Expose pschange-mc-no "feature", indicating CPU does not have the page size change machine check vulnerability (CVE-2018-12207 bsc#1155812) target-i386-add-PSCHANGE_NO-bit-for-the-.patch - Expose taa-no "feature", indicating CPU does not have the TSX Async Abort vulnerability. (CVE-2019-11135 bsc#1152506) target-i386-Export-TAA_NO-bit-to-guests.patch Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Update to v4.1.1, a stable, bug-fix-only release * Besides incorporating the following fixes we already carried, it includes about the same number of other, similar type fixes which we hadn't yet incorporated. * Patches dropped (subsumed by stable update): block-Add-bdrv_co_get_self_request.patch block-create-Do-not-abort-if-a-block-dri.patch block-file-posix-Let-post-EOF-fallocate-.patch block-file-posix-Reduce-xfsctl-use.patch block-io-refactor-padding.patch blockjob-update-nodes-head-while-removin.patch block-Make-wait-mark-serialising-request.patch block-nfs-tear-down-aio-before-nfs_close.patch coroutine-Add-qemu_co_mutex_assert_locke.patch curl-Check-completion-in-curl_multi_do.patch curl-Handle-success-in-multi_check_compl.patch curl-Keep-pointer-to-the-CURLState-in-CU.patch curl-Keep-socket-until-the-end-of-curl_s.patch curl-Pass-CURLSocket-to-curl_multi_do.patch curl-Report-only-ready-sockets.patch hw-arm-boot.c-Set-NSACR.-CP11-CP10-for-N.patch hw-core-loader-Fix-possible-crash-in-rom.patch make-release-pull-in-edk2-submodules-so-.patch memory-Provide-an-equality-function-for-.patch mirror-Keep-mirror_top_bs-drained-after-.patch pr-manager-Fix-invalid-g_free-crash-bug.patch qcow2-bitmap-Fix-uint64_t-left-shift-ove.patch qcow2-Fix-corruption-bug-in-qcow2_detect.patch qcow2-Fix-QCOW2_COMPRESSED_SECTOR_MASK.patch qcow2-Fix-the-calculation-of-the-maximum.patch roms-Makefile.edk2-don-t-pull-in-submodu.patch s390-PCI-fix-IOMMU-region-init.patch s390x-tcg-Fix-VERIM-with-32-64-bit-eleme.patch target-alpha-fix-tlb_fill-trap_arg2-valu.patch target-arm-Don-t-abort-on-M-profile-exce.patch target-arm-Free-TCG-temps-in-trans_VMOV_.patch util-iov-introduce-qemu_iovec_init_exten.patch vhost-Fix-memory-region-section-comparis.patch vpc-Return-0-from-vpc_co_create-on-succe.patch Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Fix %arm builds - Fix two issues with qcow2 image processing which could affect disk integrity qcow2-Fix-QCOW2_COMPRESSED_SECTOR_MASK.patch qcow2-bitmap-Fix-uint64_t-left-shift-ove.patch - Work around a host kernel xfs bug which can result in qcow2 image corruption block-io-refactor-padding.patch util-iov-introduce-qemu_iovec_init_exten.patch block-Make-wait-mark-serialising-request.patch block-Add-bdrv_co_get_self_request.patch block-file-posix-Let-post-EOF-fallocate-.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Correct package names in _constraints after switch to multibuild. - Address potential corruption when using qcow2 images coroutine-Add-qemu_co_mutex_assert_locke.patch qcow2-Fix-corruption-bug-in-qcow2_detect.patch - Include more tweaks to our packaging workflow scripts - this will continue as we refine the scripts - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - use %gcc_version for cross compilers (boo#1153703) - Add upstream edk2 submodule fix for creating tarball - Switch to upstream patch for avoiding git ref in edk2 makefile - Fix failing block tests which aren't compatible with the configure option --enable-membarrier * Patches dropped: roms-Makefile.edk2-don-t-invoke-git-sinc.patch tests-block-io-test-130-needs-some-delay.patch * Patches added: make-release-pull-in-edk2-submodules-so-.patch roms-Makefile.edk2-don-t-pull-in-submodu.patch tests-Fix-block-tests-to-be-compatible-w.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Reduce the cross compiler versions we rely on - Fix some qemu-testsuite issues, reducing known error cases test-add-mapping-from-arch-of-i686-to-qe.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Since our spec file has bashisms, include the following in the spec file: %define _buildshell /bin/bash - Disable some block tests which randomly fail. This is in context of the build service build of qemu-testsuite tests-Disable-some-block-tests-for-now.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Add some post v4.1.0 upstream stable patches * Patches added: mirror-Keep-mirror_top_bs-drained-after-.patch s390x-tcg-Fix-VERIM-with-32-64-bit-eleme.patch target-alpha-fix-tlb_fill-trap_arg2-valu.patch target-arm-Free-TCG-temps-in-trans_VMOV_.patch target-arm-Don-t-abort-on-M-profile-exce.patch qcow2-Fix-the-calculation-of-the-maximum.patch block-file-posix-Reduce-xfsctl-use.patch pr-manager-Fix-invalid-g_free-crash-bug.patch vpc-Return-0-from-vpc_co_create-on-succe.patch block-nfs-tear-down-aio-before-nfs_close.patch block-create-Do-not-abort-if-a-block-dri.patch curl-Keep-pointer-to-the-CURLState-in-CU.patch curl-Keep-socket-until-the-end-of-curl_s.patch curl-Check-completion-in-curl_multi_do.patch curl-Pass-CURLSocket-to-curl_multi_do.patch curl-Report-only-ready-sockets.patch curl-Handle-success-in-multi_check_compl.patch blockjob-update-nodes-head-while-removin.patch memory-Provide-an-equality-function-for-.patch vhost-Fix-memory-region-section-comparis.patch hw-arm-boot.c-Set-NSACR.-CP11-CP10-for-N.patch s390-PCI-fix-IOMMU-region-init.patch hw-core-loader-Fix-possible-crash-in-rom.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Include more tweaks to our packaging workflow scripts - Produce qemu-linux-user and qemu-testsuite via the build service multibuild capability, instead of duplicating the spec file and using package link in build service * combine qemu-linux-user spec file into main qemu spec file. Since this model uses a single changelog, here are some historicial mentions from the now unused qemu-linux-user.changes (delta from qemu's was quite minimal): - Adjust to a v5.2 linux kernel change regarding SIOCGSTAMP - Fix pwrite64/pread64 to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600) * bsc#1112499 * Since qemu-testsuite.spec and qemu-testsuite.changes were just copies of the main qemu version nothing needs to be done there - Build opensbi from source on riscv64 - Update to v4.1.0: See http://wiki.qemu.org/ChangeLog/4.1 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in Appendix B of the qemu-doc.* files installed with the qemu package Some noteworthy changes: * x86: CPU models are now versioned * x86: CPU die topology can now be configured * x86: New Hygon Dhyana and Intel Snowridge CPU models * s390: The bios now supports IPL (boot) from ECKD DASD assigned to the guest via vfio-ccw * s390: The bios now tolerates the presence of bootmap signature entries written by zipl * PowerPC: pseries machine now supports KVM acceleration (kernel_irqchip=on) of the XIVE interrupt controller * PowerPC: pseries now supports hot-plug of PCI bridges and hot-plug and unplug of devices under PCI bridges * ARM: QEMU now supports emulating an FPU for Cortex-M CPUs, and the Cortex-M4 and Cortex-M33 now provide the FP * Python 2 support is deprecated * UEFI platform firmware binaries, and matching variable store templates are now installed * Now it's possible to specify memory-less NUMA node when using "-numa node,memdev" options * Possible to trigger self announcement on specific network interfaces * Default memory distribution between NUMA nodes is now deprecated * Fallback to normal RAM allocation if QEMU is not able to allocate from the "-mem-path" provided file/filesystem is now deprecated * virtio-gpu 2d/3d rendering may now be offloaded to an external vhost-user process, such as QEMU vhost-user-gpu * QEMU will automatically try to use the MAP_SYNC mmap flag for memory backends configured with pmem=on,share=on * Additional SeaVGABIOS patches added for vga-ati compatibility - Drop attempt at build compatibility with SLE12 - New sub-packages: qemu-edk2, qemu-vhost-user-gpu - Conditionalize building of qemu-edk2 (and leave unbuilt for now) - Implement new packaging workflow, includes no longer numbering patches, and having the "current git repo" stored with the package in the form of git bundles * Patches dropped (upstream unless otherwise noted): 0027-tests-test-thread-pool-is-racy-add-.patch 0032-tests-Fix-Makefile-handling-of-chec.patch 0034-Revert-target-i386-kvm-add-VMX-migr.patch 0036-sockets-avoid-string-truncation-war.patch 0039-linux-user-avoid-string-truncation-.patch 0040-linux-user-elfload-Fix-GCC-9-build-.patch 0041-qxl-avoid-unaligned-pointer-reads-w.patch 0042-libvhost-user-fix-Waddress-of-packe.patch 0043-target-i386-define-md-clear-bit.patch 0045-kbd-state-fix-autorepeat-handling.patch 0046-target-ppc-ensure-we-get-null-termi.patch 0049-qxl-check-release-info-object.patch 0050-qemu-bridge-helper-restrict-interfa.patch 0051-linux-user-fix-to-handle-variably-s.patch ipxe-use-gcc6-for-more-compact-code.patch (no longer needed) (the next three are replaced by the upstream equivalent) ipxe-efi-Simplify-diagnostic-for-NULL-handle.patch ipxe-build-Disable-gcc-address-of-packed-member-warning.patch ipxe-efi-Avoid-string-op-warning-with-cross-gcc-7-compile.patch slirp-fix-heap-overflow-in-ip_reass-on-big-packet-input.patch * Patches renamed: 0001-XXX-dont-dump-core-on-sigabort.patch - > XXX-dont-dump-core-on-sigabort.patch 0002-qemu-binfmt-conf-Modify-default-pat.patch - > qemu-binfmt-conf-Modify-default-path.patch 0003-qemu-cvs-gettimeofday.patch - > qemu-cvs-gettimeofday.patch 0004-qemu-cvs-ioctl_debug.patch - > qemu-cvs-ioctl_debug.patch 0005-qemu-cvs-ioctl_nodirection.patch - > qemu-cvs-ioctl_nodirection.patch 0006-linux-user-add-binfmt-wrapper-for-a.patch - > linux-user-add-binfmt-wrapper-for-argv-0.patch 0007-PPC-KVM-Disable-mmu-notifier-check.patch - > PPC-KVM-Disable-mmu-notifier-check.patch 0008-linux-user-binfmt-support-host-bina.patch - > linux-user-binfmt-support-host-binaries.patch 0009-linux-user-Fake-proc-cpuinfo.patch - > linux-user-Fake-proc-cpuinfo.patch 0010-linux-user-use-target_ulong.patch - > linux-user-use-target_ulong.patch 0011-Make-char-muxer-more-robust-wrt-sma.patch - > Make-char-muxer-more-robust-wrt-small-FI.patch 0012-linux-user-lseek-explicitly-cast-no.patch - > linux-user-lseek-explicitly-cast-non-set.patch 0013-AIO-Reduce-number-of-threads-for-32.patch - > AIO-Reduce-number-of-threads-for-32bit-h.patch 0014-xen_disk-Add-suse-specific-flush-di.patch - > xen_disk-Add-suse-specific-flush-disable.patch 0015-qemu-bridge-helper-reduce-security-.patch - > qemu-bridge-helper-reduce-security-profi.patch 0016-qemu-binfmt-conf-use-qemu-ARCH-binf.patch - > qemu-binfmt-conf-use-qemu-ARCH-binfmt.patch 0017-linux-user-properly-test-for-infini.patch - > linux-user-properly-test-for-infinite-ti.patch 0018-roms-Makefile-pass-a-packaging-time.patch - > roms-Makefile-pass-a-packaging-timestamp.patch 0019-Raise-soft-address-space-limit-to-h.patch - > Raise-soft-address-space-limit-to-hard-l.patch 0020-increase-x86_64-physical-bits-to-42.patch - > increase-x86_64-physical-bits-to-42.patch 0021-vga-Raise-VRAM-to-16-MiB-for-pc-0.1.patch - > vga-Raise-VRAM-to-16-MiB-for-pc-0.15-and.patch 0022-i8254-Fix-migration-from-SLE11-SP2.patch - > i8254-Fix-migration-from-SLE11-SP2.patch 0023-acpi_piix4-Fix-migration-from-SLE11.patch - > acpi_piix4-Fix-migration-from-SLE11-SP2.patch 0024-Switch-order-of-libraries-for-mpath.patch - > Switch-order-of-libraries-for-mpath-supp.patch 0025-Make-installed-scripts-explicitly-p.patch - > Make-installed-scripts-explicitly-python.patch 0026-hw-smbios-handle-both-file-formats-.patch - > hw-smbios-handle-both-file-formats-regar.patch 0028-xen-add-block-resize-support-for-xe.patch - > xen-add-block-resize-support-for-xen-dis.patch 0029-tests-qemu-iotests-Triple-timeout-o.patch - > tests-qemu-iotests-Triple-timeout-of-i-o.patch 0030-tests-block-io-test-130-needs-some-.patch - > tests-block-io-test-130-needs-some-delay.patch 0031-xen-ignore-live-parameter-from-xen-.patch - > xen-ignore-live-parameter-from-xen-save-.patch 0033-Conditionalize-ui-bitmap-installati.patch - > Conditionalize-ui-bitmap-installation-be.patch 0035-tests-change-error-message-in-test-.patch - > tests-change-error-message-in-test-162.patch 0037-hw-usb-hcd-xhci-Fix-GCC-9-build-war.patch - > hw-usb-hcd-xhci-Fix-GCC-9-build-warning.patch 0038-hw-usb-dev-mtp-Fix-GCC-9-build-warn.patch - > hw-usb-dev-mtp-Fix-GCC-9-build-warning.patch 0044-hw-intc-exynos4210_gic-provide-more.patch - > hw-intc-exynos4210_gic-provide-more-room.patch 0047-configure-only-populate-roms-if-sof.patch - > configure-only-populate-roms-if-softmmu.patch 0048-pc-bios-s390-ccw-net-avoid-warning-.patch - > pc-bios-s390-ccw-net-avoid-warning-about.patch keycodemapdb-make-keycode-gen-output-reproducible.patch - > Make-keycode-gen-output-reproducible-use.patch ipxe-stub-out-the-SAN-req-s-in-int13.patch - > stub-out-the-SAN-req-s-in-int13.patch sgabios-fix-cross-build.patch deleted - > roms-sgabios-Fix-csum8-to-be-built-by-ho.patch sgabios-stable-buildid.patch - > sgabios-Makefile-fix-issues-of-build-rep.patch skiboot-gcc9-compat.patch - > Disable-Waddress-of-packed-member-for-GC.patch ipxe-stable-buildid.patch - > ipxe-Makefile-fix-issues-of-build-reprod.patch seabios-fix_cross_compilation.patch - > enable-cross-compilation-on-ARM.patch * Patches added: roms-change-cross-compiler-naming-to-be-.patch roms-Makefile.edk2-don-t-invoke-git-sinc.patch vga-move-modelist-from-bochsvga.c-to-new.patch vga-make-memcpy_high-public.patch vga-add-atiext-driver.patch vga-add-ati-bios-tables.patch vbe-add-edid-support.patch ati-add-edid-support.patch ati-vga-make-less-verbose.patch ati-vga-fix-ati_read.patch ati-vga-make-i2c-register-and-bits-confi.patch ati-vga-try-vga-ddc-first.patch ati-vga-add-rage128-edid-support.patch Fix-s-directive-argument-is-null-error.patch Workaround-compilation-error-with-gcc-9..patch Do-not-apply-WORKAROUND_CFLAGS-for-host-.patch hdata-vpd-fix-printing-char-0x00.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.1 - Since we build seabios, take advantage of ability to add our own identifying version info by changing SEABIOS_EXTRAVERSION from "-prebuilt.qemu.org" to "-rebuilt.suse.com" (or "-rebuilt.opensuse.org for openSUSE releases) - Security fix for heap overflow in ip_reass on big packet input (CVE-2019-14378, bsc#1143794) slirp-fix-heap-overflow-in-ip_reass-on-big-packet-input.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 * Patches added: 0051-linux-user-fix-to-handle-variably-s.patch - Make keycode-gen output reproducible (use SOURCE_DATE_EPOCH timestamp) keycodemapdb-make-keycode-gen-output-reproducible.patch - Security fix for null pointer dereference while releasing spice resources (CVE-2019-12155, bsc#1135902) 0049-qxl-check-release-info-object.patch - Security fix for qemu-bridge-helper ACL can be bypassed when names are too long (CVE-2019-13164, bsc#1140402) 0050-qemu-bridge-helper-restrict-interfa.patch - Replace patch 0043 with an upstream version 0043-target-i386-define-md-clear-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - fixed regression for ksm.service was (bsc#1112646) - Content of packaged %_docdir/%name/interop/_static/ dir depends on python-Sphinx version, so lets just wildcard specifying those files, rather than trying to manage a specific file list - Last change exposed that we still do rely on python2. Make spec file adjustment - Switch from python-Sphinx to Sphinx from python variant we are building with (new Sphinx is for python3 only) - Fix a number of compatibility issues with the stricter gcc9 checks * Disable warning for taking address of packed structure members 0048-pc-bios-s390-ccw-net-avoid-warning-.patch * Fix case of strncpy where null terminated string not guaranteed 0046-target-ppc-ensure-we-get-null-termi.patch * Disable warning for taking address of packed structure members and fix case of passing null pointer as "%s" format parameter skiboot-gcc9-compat.patch - Fix configure script which caused firmware to be built in linux-user only build. 0047-configure-only-populate-roms-if-sof.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Fix regression in autorepeat key handling 0045-kbd-state-fix-autorepeat-handling.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Fix file list - Yet another gcc9 related code fix (bsc#1121464) 0044-hw-intc-exynos4210_gic-provide-more.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Switch to now upstreamed version of patch and add one more gcc9 related patch * Patches renamed: 0041-qxl-fix-Waddress-of-packed-member.patch - > 0041-qxl-avoid-unaligned-pointer-reads-w.patch 0042-libvhost-user-fix-Waddress-of-packe.patch - Add x86 cpu feature "md-clear" (CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091 bsc#1111331) 0043-target-i386-define-md-clear-bit.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Correct logic of which ipxe patches get included based on suse_version. We were wrongly excluding a gcc9 related patch for example - Switch to now upstreamed version of some patches * Patches renamed: 0036-util-qemu-sockets-Fix-GCC-9-build-w.patch - > 0036-sockets-avoid-string-truncation-war.patch 0039-linux-user-uname-Fix-GCC-9-build-wa.patch - > 0039-linux-user-avoid-string-truncation-.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Create /usr/share/qemu/firmware and /etc/qemu/firmware directories in support of the firmware descriptor feature now in use as of libvirt v5.2 - Disable LTO as suggested by Martin Liska (boo#1133281) - Remove and obsolete qemu-oss-audio subpackage. OSS audio is very old, and we didn't really even configure the package properly for it for a very long time, so presumably there can't be any users of it as far as qemu is concerned - Avoid warnings which gcc9 complains about 0036-util-qemu-sockets-Fix-GCC-9-build-w.patch 0037-hw-usb-hcd-xhci-Fix-GCC-9-build-war.patch 0038-hw-usb-dev-mtp-Fix-GCC-9-build-warn.patch 0039-linux-user-uname-Fix-GCC-9-build-wa.patch 0040-linux-user-elfload-Fix-GCC-9-build-.patch 0041-qxl-fix-Waddress-of-packed-member.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Update to v4.0.0: See http://wiki.qemu.org/ChangeLog/4.0 Take note that ongoing feature deprecation is tracked at both http://wiki.qemu-project.org/Features/LegacyRemoval and in Appendix B of the qemu-doc.* files installed with the qemu package Some noteworthy changes: * ARM: ARMv8+ extensions for SB, PredInv, HPD, LOR, FHM, AA32HPD, PAuth, JSConv, CondM, FRINT, and BTI * ARM: new emulation support for "Musca" and "MPS2" development boards * ARM: virt: support for >255GB of RAM and u-boot "noload" image types * ARM: improved emulation of ARM PMU * HPPA: support for TLB protection IDs and TLB trace events * MIPS: support for multi-threaded TCG emulation * MIPS: emulation support for I7200 I6500 CPUs, QMP-base querying of CPU types, and improved support for SAARI and SAAR configuration registers * MIPS: improvements to Interthread Communication Unit, Fulong 2E machine types, and end-user documentation. * PowerPC: pseries/powernv: support for POWER9 large decrementer * PowerPC: pseries: emulation support for XIVE interrupt controller * PowerPC: pseries: support for hotplugging PCI host bridges (PHBs) * PowerPC: pseries: Spectre/Meltdown mitigations enabled by default, additional support for count-cache-flush mitigation * RISC-V: virt: support for PCI and USB * RISC-V: support for TSR, TW, and TVM fields of mstatus, FS field now supports three stats (dirty, clean, and off) * RISC-V: built-in gdbserver supports register lists via XML files * s390: support for z14 GA 2 CPU model, Multiple-epoch and PTFF features now enabled in z14 CPU model by default * s390: vfio-ap: now supports hot plug/unplug, and no longer inhibits memory ballooning * s390: emulation support for floating-point extension facility and vector support instructions * x86: HAX accelerator now supported POSIX hosts other than Darwin, including Linux and NetBSD * x86: Q35: advertised PCIe root port speeds will now optimally default to maximum link speed (16GT/s) and width (x32) provided by PCIe 4.0 for QEMU 4.0+ machine types; older machine types will retain 2.5GT/x1 defaults for compatibility. * x86: Xen PVH images can now be booted with "-kernel" option * Xtensa: xtfpga: improved SMP support for linux (interrupt distributor, IPI, and runstall) and new SMP-capable test_mmuhifi_c3 core configuration * Xtensa: support for Flexible length instructions extension (FLIX) * GUI: new '-display spice-app' to configure/launch a Spice client GUI with a similar UI to QEMU GTK. VNC server now supports access controls via tls-authz/sasl-authz options * QMP: support for "out-of-band" command execution, can be useful for postcopy migration recovery. Additional QMP commands for working with block devices and dirty bitmaps * VFIO: EDID interface for supported mdev (Intel vGPU for kernel 5.0+), allows resolution setting via xres/yres options. * Xen: new 'xen-disk' device which can create a Xen PV disk backend, and performance improvements for Xen PV disk backend. * Network Block Device: improved tracing and error diagnostics, improved client compatibility with buggy NBD server implementations, new - -bitmap, --list, --tls-authz options for qemu-nbd * virtio-blk now supports DISCARD and WRITE_ZEROES * qemu-test-suite output is now in TAP format * Sphinx now used for part of qemu documentation * A few more configure features are enabled: iconv, lzfse (for openSUSE) * Provide better logo icons - Made these package building changes: * Removed this token from spec file: #!BuildIgnore: gcc-PIE * Created ability to build qemu source out-of-tree * Added BSD-2-Clause license clause due to EDK II code inclusion * Patches dropped (upstream unless otherwise noted): 0010-Remove-problematic-evdev-86-key-fro.patch 0025-Fix-tigervnc-long-press-issue.patch 0026-string-input-visitor-Fix-uint64-par.patch 0027-test-string-input-visitor-Add-int-t.patch 0028-test-string-input-visitor-Add-uint6.patch 0029-tests-Add-QOM-property-unit-tests.patch 0030-tests-Add-scsi-disk-test.patch 0033-smbios-Add-1-terminator-if-any-stri.patch (different approach used) 0034-qemu-io-tests-comment-out-problemat.patch (not as needed) 0039-xen_disk-Avoid-repeated-memory-allo.patch 0041-vfio-ap-flag-as-compatible-with-bal.patch 0042-hw-s390x-Fix-bad-mask-in-time2tod.patch 0043-pcie-set-link-state-inactive-active.patch 0044-pc-piix4-Update-smbus-I-O-space-aft.patch 0045-hw-usb-fix-mistaken-de-initializati.patch 0046-usb-mtp-use-O_NOFOLLOW-and-O_CLOEXE.patch 0047-pvrdma-release-device-resources-in-.patch 0048-rdma-check-num_sge-does-not-exceed-.patch 0049-pvrdma-add-uar_read-routine.patch 0050-pvrdma-check-number-of-pages-when-c.patch 0051-pvrdma-check-return-value-from-pvrd.patch 0052-pvrdma-release-ring-object-in-case-.patch 0053-block-Fix-hangs-in-synchronous-APIs.patch 0054-linux-user-make-pwrite64-pread64-fd.patch 0055-xen-Add-xen-v4.12-based-xc_domain_c.patch 0056-slirp-check-data-length-while-emula.patch 0057-s390x-Return-specification-exceptio.patch 0059-memory-Fix-the-memory-region-type-a.patch 0060-target-i386-sev-Do-not-pin-the-ram-.patch 0061-slirp-check-sscanf-result-when-emul.patch 0062-ppc-add-host-serial-and-host-model-.patch 0063-i2c-ddc-fix-oob-read.patch 0064-device_tree.c-Don-t-use-load_image.patch 0065-spapr-Simplify-handling-of-host-ser.patch ipxe-efi-guard-strncpy-with-gcc-warning-ignore-pragma.patch ipxe-fix-build.patch skiboot-hdata-i2c.c-fix-building-with-gcc8.patch * Patches renamed: 0011-linux-user-use-target_ulong.patch - > 0010-linux-user-use-target_ulong.patch 0012-Make-char-muxer-more-robust-wrt-sma.patch - > 0011-Make-char-muxer-more-robust-wrt-sma.patch 0013-linux-user-lseek-explicitly-cast-no.patch - > 0012-linux-user-lseek-explicitly-cast-no.patch 0014-AIO-Reduce-number-of-threads-for-32.patch - > 0013-AIO-Reduce-number-of-threads-for-32.patch 0015-xen_disk-Add-suse-specific-flush-di.patch - > 0014-xen_disk-Add-suse-specific-flush-di.patch 0016-qemu-bridge-helper-reduce-security-.patch - > 0015-qemu-bridge-helper-reduce-security-.patch 0017-qemu-binfmt-conf-use-qemu-ARCH-binf.patch - > 0016-qemu-binfmt-conf-use-qemu-ARCH-binf.patch 0018-linux-user-properly-test-for-infini.patch - > 0017-linux-user-properly-test-for-infini.patch 0019-roms-Makefile-pass-a-packaging-time.patch - > 0018-roms-Makefile-pass-a-packaging-time.patch 0020-Raise-soft-address-space-limit-to-h.patch - > 0019-Raise-soft-address-space-limit-to-h.patch 0021-increase-x86_64-physical-bits-to-42.patch - > 0020-increase-x86_64-physical-bits-to-42.patch 0022-vga-Raise-VRAM-to-16-MiB-for-pc-0.1.patch - > 0021-vga-Raise-VRAM-to-16-MiB-for-pc-0.1.patch 0023-i8254-Fix-migration-from-SLE11-SP2.patch - > 0022-i8254-Fix-migration-from-SLE11-SP2.patch 0024-acpi_piix4-Fix-migration-from-SLE11.patch - > 0023-acpi_piix4-Fix-migration-from-SLE11.patch 0031-Switch-order-of-libraries-for-mpath.patch - > 0024-Switch-order-of-libraries-for-mpath.patch 0032-Make-installed-scripts-explicitly-p.patch - > 0025-Make-installed-scripts-explicitly-p.patch 0035-tests-test-thread-pool-is-racy-add-.patch - > 0027-tests-test-thread-pool-is-racy-add-.patch 0036-xen-add-block-resize-support-for-xe.patch - > 0028-xen-add-block-resize-support-for-xe.patch 0037-tests-qemu-iotests-Triple-timeout-o.patch - > 0029-tests-qemu-iotests-Triple-timeout-o.patch 0038-tests-block-io-test-130-needs-some-.patch - > 0030-tests-block-io-test-130-needs-some-.patch 0040-xen-ignore-live-parameter-from-xen-.patch - > 0031-xen-ignore-live-parameter-from-xen-.patch 0058-Revert-target-i386-kvm-add-VMX-migr.patch - > 0034-Revert-target-i386-kvm-add-VMX-migr.patch * Patches added: 0026-hw-smbios-handle-both-file-formats-.patch 0032-tests-Fix-Makefile-handling-of-chec.patch 0033-Conditionalize-ui-bitmap-installati.patch 0035-tests-change-error-message-in-test-.patch ipxe-efi-Avoid-string-op-warning-with-cross-gcc-7-compile.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-4.0 - Adjust fix for CVE-2019-8934 (bsc#1126455) to match the latest upstream adjustments for the same. Basically now the security fix is to provide a dummy host-model and host-serial value, which overrides getting that value from the host 0065-spapr-Simplify-handling-of-host-ser.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Tweak last spec file change to guard new Requires with conditional - Fix DOS possibility in device tree processing (CVE-2018-20815 bsc#1130675) 0064-device_tree.c-Don-t-use-load_image.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Remove an unneeded BuildRequires which impacts bsc#1119414 fix Also add a corresponding Recommends for qemu-tools as part of this packaging adjustment (bsc#1130484) - Fix information leak in slirp (CVE-2019-9824 bsc#1129622) 0061-slirp-check-sscanf-result-when-emul.patch - Add method to specify whether or not to expose certain ppc64 host information, which can be considered a security issue (CVE-2019-8934 bsc#1126455) 0062-ppc-add-host-serial-and-host-model-.patch - Fix OOB memory access and information leak in virtual monitor interface (CVE-2019-03812 bsc#1125721) 0063-i2c-ddc-fix-oob-read.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Again address ipxe GCC 9 incompatibilities. Previously included patch to disable unneeded warning got muffed somehow (bsc#1121464) - Package and cross-build rom files for aarch64 from SLE15/Leap15.0 to fix boo#1125964 - Add patch to fix seabios cross-compilation: * seabios-fix_cross_compilation.patch - Add patch to fix sgabios cross-compilation: * sgabios-fix-cross-build.patch - Fix _constraints to include all architectures for disk size (fix aarch64) - Revert upstream patch which declares x86 vmx feature a migration blocker. Given the proliferation of using vm's with host features passed through and the general knowledge that nested virtualization has many usage caveats, but still gets put in use in restricted scenarios, this patch did more harm than good, I feel. So despite this relaxation, please consider yourself warned that nested virtualization is not yet a supportable feature. (bsc#1121604) 0058-Revert-target-i386-kvm-add-VMX-migr.patch - Fix SEV VM device assignment (bsc#1123205) 0059-memory-Fix-the-memory-region-type-a.patch 0060-target-i386-sev-Do-not-pin-the-ram-.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Remove 71-sev.rules, which modifies the default permissions of /dev/sev by adding the kvm group as reader/writer. Upstream decided to take a different approach for libvirt to manage SEV due to security concerns which I agree overrides the convenience of providing /dev/sev access to all the kvm group (bsc#1124842 bsc#1102604) - Increase memory needed to build qemu-testsuite for ppc* arch's in _constraints file - Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179) - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 * Patches added: 0057-s390x-Return-specification-exceptio.patch - Fix OOB issue in slirp (CVE-2019-6778 bsc#1123156) 0056-slirp-check-data-length-while-emula.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Fix ipxe GCC 9 incompatibilities (bsc#1121464) ipxe-efi-Simplify-diagnostic-for-NULL-handle.patch ipxe-build-Disable-gcc-address-of-packed-member-warning.patch - Tweak Xen interface to be compatible with upcoming v4.12 Xen 0055-xen-Add-xen-v4.12-based-xc_domain_c.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 * Patches added: 0054-linux-user-make-pwrite64-pread64-fd.patch (bsc#1121600) - Clarify that move to include v3.1.0 in qemu package corresponds with fate#327089, which of course builds on v3.0.0 mentioned previously, and that among other patches which this change obsoletes (because functionality is included in base version) I will mention one pointed out by reviewers: 0094-s390x-cpumodels-add-z14-Model-ZR1.patch - include post v3.1.0 patches marked for next stable release: 0041-vfio-ap-flag-as-compatible-with-bal.patch 0042-hw-s390x-Fix-bad-mask-in-time2tod.patch 0043-pcie-set-link-state-inactive-active.patch 0044-pc-piix4-Update-smbus-I-O-space-aft.patch 0045-hw-usb-fix-mistaken-de-initializati.patch - Address various security/stability issues * Fix host access vulnerability in usb-mtp infrastructure (CVE-2018-16872 bsc#1119493) 0046-usb-mtp-use-O_NOFOLLOW-and-O_CLOEXE.patch * Fix DoS in pvrdma interface (CVE-2018-20123 bsc#1119437) 0047-pvrdma-release-device-resources-in-.patch * Fix OOB access issue in rdma backend (CVE-2018-20124 bsc#1119840) 0048-rdma-check-num_sge-does-not-exceed-.patch * Fix NULL pointer reference in pvrdma emulation (CVE-2018-20191 bsc#1119979) 0049-pvrdma-add-uar_read-routine.patch * Fix DoS in pvrdma interface (CVE-2018-20125 bsc#1119989) 0050-pvrdma-check-number-of-pages-when-c.patch * Fix DoS in pvrdma interface (CVE-2018-20216 bsc#1119984) 0051-pvrdma-check-return-value-from-pvrd.patch * Fix DoS in pvrdma interface (CVE-2018-20126 bsc#1119991) 0052-pvrdma-release-ring-object-in-case-.patch - one more post v3.1.0 patches marked for next stable release: 0053-block-Fix-hangs-in-synchronous-APIs.patch - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 - Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-3.1 * Patches added: 0040-xen-ignore-live-parameter-from-xen-.patch (bsc#1079730, bsc#1101982, bsc#1063993) - Follow up on ideas prompted by last change: clean up the patches generated by git workflow. There is no value to the first line (mbox From line), or [PATCH] on subject line. Get rid of those - Other minor fixes and improvements to update_git.sh - Modify update_git.sh script: pass --zero-commit to format-patch This removes needless noise in the buildservice when the same set of patches is imported/exported at different times by different users. pass --no-signature to format-patch Remove sed call which used to remove the signature, use mv instead ==== wayland ==== Subpackages: libwayland-client0 libwayland-cursor0 libwayland-egl1 libwayland-server0 - modernize spec file * use licensedir * use bcond * use https:// urls * spec-cleaner ==== xwayland ==== Version update (22.1.1 -> 22.1.2) - Update to version 22.1.2 * randr: Add "RANDR Emulation" property * xwayland/output: Set the "RANDR Emulation" property * xwayland: Fix invalid pointer access in drm_lease_device_handle_released.