
############################################################################
##
## Copyright (C) 2013 Riverbank Computing Limited.
## Copyright (C) 2016 The Qt Company Ltd.
## Contact: http://www.qt.io/licensing/
##
## This file is part of the Qt for Python examples of the Qt Toolkit.
##
## $QT_BEGIN_LICENSE:BSD$
## You may use this file under the terms of the BSD license as follows:
##
## "Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions are
## met:
##   * Redistributions of source code must retain the above copyright
##     notice, this list of conditions and the following disclaimer.
##   * Redistributions in binary form must reproduce the above copyright
##     notice, this list of conditions and the following disclaimer in
##     the documentation and/or other materials provided with the
##     distribution.
##   * Neither the name of The Qt Company Ltd nor the names of its
##     contributors may be used to endorse or promote products derived
##     from this software without specific prior written permission.
##
##
## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
## "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
## LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
## A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
## OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
## DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
## THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
## (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
## OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
##
## $QT_END_LICENSE$
##
############################################################################

"""PySide2 port of the opengl/legacy/hellogl example from Qt v5.x"""

import sys
import math
from PySide2 import QtCore, QtGui, QtWidgets, QtOpenGL

try:
    from OpenGL import GL
except ImportError:
    app = QtWidgets.QApplication(sys.argv)
    messageBox = QtWidgets.QMessageBox(QtWidgets.QMessageBox.Critical, "OpenGL hellogl",
                                       "PyOpenGL must be installed to run this example.",
                                       QtWidgets.QMessageBox.Close)
    messageBox.setDetailedText("Run:\npip install PyOpenGL PyOpenGL_accelerate")
    messageBox.exec_()
    sys.exit(1)


class Window(QtWidgets.QWidget):
    def __init__(self, parent=None):
        QtWidgets.QWidget.__init__(self, parent)

        self.glWidget = GLWidget()

        self.xSlider = self.createSlider(QtCore.SIGNAL("xRotationChanged(int)"),
                                         self.glWidget.setXRotation)
        self.ySlider = self.createSlider(QtCore.SIGNAL("yRotationChanged(int)"),
                                         self.glWidget.setYRotation)
        self.zSlider = self.createSlider(QtCore.SIGNAL("zRotationChanged(int)"),
                                         self.glWidget.setZRotation)

        mainLayout = QtWidgets.QHBoxLayout()
        mainLayout.addWidget(self.glWidget)
        mainLayout.addWidget(self.xSlider)
        mainLayout.addWidget(self.ySlider)
        mainLayout.addWidget(self.zSlider)
        self.setLayout(mainLayout)

        self.xSlider.setValue(170 * 16)
        self.ySlider.setValue(160 * 16)
        self.zSlider.setValue(90 * 16)

        self.setWindowTitle(self.tr("Hello GL"))

    def createSlider(self, changedSignal, setterSlot):
        slider = QtWidgets.QSlider(QtCore.Qt.Vertical)

        slider.setRange(0, 360 * 16)
        slider.setSingleStep(16)
        slider.setPageStep(15 * 16)
        slider.setTickInterval(15 * 16)
        slider.setTickPosition(QtWidgets.QSlider.TicksRight)

        self.glWidget.connect(slider, QtCore.SIGNAL("valueChanged(int)"), setterSlot)
        self.connect(self.glWidget, changedSignal, slider, QtCore.SLOT("setValue(int)"))

        return slider


class GLWidget(QtOpenGL.QGLWidget):
    xRotationChanged = QtCore.Signal(int)
    yRotationChanged = QtCore.Signal(int)
    zRotationChanged = QtCore.Signal(int)

    def __init__(self, parent=None):
        QtOpenGL.QGLWidget.__init__(self, parent)

        self.object = 0
        self.xRot = 0
        self.yRot = 0
        self.zRot = 0

        self.lastPos = QtCore.QPoint()

        self.trolltechGreen = QtGui.QColor.fromCmykF(0.40, 0.0, 1.0, 0.0)
        self.trolltechPurple = QtGui.QColor.fromCmykF(0.39, 0.39, 0.0, 0.0)

    def xRotation(self):
        return self.xRot

    def yRotation(self):
        return self.yRot

    def zRotation(self):
        return self.zRot

    def minimumSizeHint(self):
        return QtCore.QSize(50, 50)

    def sizeHint(self):
        return QtCore.QSize(400, 400)

    def setXRotation(self, angle):
        angle = self.normalizeAngle(angle)
        if angle != self.xRot:
            self.xRot = angle
            self.emit(QtCore.SIGNAL("xRotationChanged(int)"), angle)
            self.updateGL()

    def setYRotation(self, angle):
        angle = self.normalizeAngle(angle)
        if angle != self.yRot:
            self.yRot = angle
            self.emit(QtCore.SIGNAL("yRotationChanged(int)"), angle)
            self.updateGL()

    def setZRotation(self, angle):
        angle = self.normalizeAngle(angle)
        if angle != self.zRot:
            self.zRot = angle
            self.emit(QtCore.SIGNAL("zRotationChanged(int)"), angle)
            self.updateGL()

    def initializeGL(self):
        self.qglClearColor(self.trolltechPurple.darker())
        self.object = self.makeObject()
        GL.glShadeModel(GL.GL_FLAT)
        GL.glEnable(GL.GL_DEPTH_TEST)
        GL.glEnable(GL.GL_CULL_FACE)

    def paintGL(self):
        GL.glClear(GL.GL_COLOR_BUFFER_BIT | GL.GL_DEPTH_BUFFER_BIT)
        GL.glLoadIdentity()
        GL.glTranslated(0.0, 0.0, -10.0)
        GL.glRotated(self.xRot / 16.0, 1.0, 0.0, 0.0)
        GL.glRotated(self.yRot / 16.0, 0.0, 1.0, 0.0)
        GL.glRotated(self.zRot / 16.0, 0.0, 0.0, 1.0)
        GL.glCallList(self.object)

    def resizeGL(self, width, height):
        side = min(width, height)
        GL.glViewport(int((width - side) / 2),int((height - side) / 2), side, side)

        GL.glMatrixMode(GL.GL_PROJECTION)
        GL.glLoadIdentity()
        GL.glOrtho(-0.5, +0.5, -0.5, +0.5, 4.0, 15.0)
        GL.glMatrixMode(GL.GL_MODELVIEW)

    def mousePressEvent(self, event):
        self.lastPos = QtCore.QPoint(event.pos())

    def mouseMoveEvent(self, event):
        dx = event.x() - self.lastPos.x()
        dy = event.y() - self.lastPos.y()

        if event.buttons() & QtCore.Qt.LeftButton:
            self.setXRotation(self.xRot + 8 * dy)
            self.setYRotation(self.yRot + 8 * dx)
        elif event.buttons() & QtCore.Qt.RightButton:
            self.setXRotation(self.xRot + 8 * dy)
            self.setZRotation(self.zRot + 8 * dx)

        self.lastPos = QtCore.QPoint(event.pos())

    def makeObject(self):
        genList = GL.glGenLists(1)
        GL.glNewList(genList, GL.GL_COMPILE)

        GL.glBegin(GL.GL_QUADS)

        x1 = +0.06
        y1 = -0.14
        x2 = +0.14
        y2 = -0.06
        x3 = +0.08
        y3 = +0.00
        x4 = +0.30
        y4 = +0.22

        self.quad(x1, y1, x2, y2, y2, x2, y1, x1)
        self.quad(x3, y3, x4, y4, y4, x4, y3, x3)

        self.extrude(x1, y1, x2, y2)
        self.extrude(x2, y2, y2, x2)
        self.extrude(y2, x2, y1, x1)
        self.extrude(y1, x1, x1, y1)
        self.extrude(x3, y3, x4, y4)
        self.extrude(x4, y4, y4, x4)
        self.extrude(y4, x4, y3, x3)

        Pi = 3.14159265358979323846
        NumSectors = 200

        for i in range(NumSectors):
            angle1 = (i * 2 * Pi) / NumSectors
            x5 = 0.30 * math.sin(angle1)
            y5 = 0.30 * math.cos(angle1)
            x6 = 0.20 * math.sin(angle1)
            y6 = 0.20 * math.cos(angle1)

            angle2 = ((i + 1) * 2 * Pi) / NumSectors
            x7 = 0.20 * math.sin(angle2)
            y7 = 0.20 * math.cos(angle2)
            x8 = 0.30 * math.sin(angle2)
            y8 = 0.30 * math.cos(angle2)

            self.quad(x5, y5, x6, y6, x7, y7, x8, y8)

            self.extrude(x6, y6, x7, y7)
            self.extrude(x8, y8, x5, y5)

        GL.glEnd()
        GL.glEndList()

        return genList

    def quad(self, x1, y1, x2, y2, x3, y3, x4, y4):
        self.qglColor(self.trolltechGreen)

        GL.glVertex3d(x1, y1, +0.05)
        GL.glVertex3d(x2, y2, +0.05)
        GL.glVertex3d(x3, y3, +0.05)
        GL.glVertex3d(x4, y4, +0.05)

        GL.glVertex3d(x4, y4, -0.05)
        GL.glVertex3d(x3, y3, -0.05)
        GL.glVertex3d(x2, y2, -0.05)
        GL.glVertex3d(x1, y1, -0.05)

    def extrude(self, x1, y1, x2, y2):
        self.qglColor(self.trolltechGreen.darker(250 + int(100 * x1)))

        GL.glVertex3d(x1, y1, -0.05)
        GL.glVertex3d(x2, y2, -0.05)
        GL.glVertex3d(x2, y2, +0.05)
        GL.glVertex3d(x1, y1, +0.05)

    def normalizeAngle(self, angle):
        while angle < 0:
            angle += 360 * 16
        while angle > 360 * 16:
            angle -= 360 * 16
        return angle

    def freeResources(self):
        self.makeCurrent()
        GL.glDeleteLists(self.object, 1)

if __name__ == '__main__':
    app = QtWidgets.QApplication(sys.argv)
    window = Window()
    window.show()
    res = app.exec_()
    window.glWidget.freeResources()
    sys.exit(res)
