*intro.txt* For Vim version 5.0j. Last modification: 1997 May 20 VIM REFERENCE MANUAL by Bram Moolenaar Introduction to Vim *ref* *reference* 1. Introduction |intro| 2. Vim on the internet |internet| 3. Credits |credits| 4. Notation |notation| 5. Modes, introduction |vim-modes-intro| 6. Switching from mode to mode |mode_switching| 7. The window contents |window_contents| ============================================================================== 1. Introduction *intro* Vim stands for Vi IMproved. It used to be Vi IMitation, but there are so many improvements that a name change was appropriate. Vim is a text editor which includes almost all the commands from the Unix program "Vi" and a lot of new ones. It is very useful for editing programs and other 8-bit ASCII text. All commands are given with the keyboard. This has the advantage that you can keep your fingers on the keyboard and your eyes on the screen. For those who want it, there is mouse support and a GUI version with scrollbars and menus (see |gui.txt|). Throughout this manual the differences between Vi and Vim are mentioned in curly braces. See |vi_diff.txt| for a summary of the differences. This manual refers to Vim on various machines. There may be small differences between different computers and terminals. Besides the remarks given in this document, there is a separate document for each supported system, see |sys-file-list|. This manual is a reference for all the Vim commands and options. This is not an introduction to the use of Vim. There are many books on Vi that contain a section for beginners. For example "Learning the Vi editor", from O'Reilly. A summary of this manual can be found in the file "help.txt", |help.txt|. It can be accessed from within Vim with the or key and with the command ":help", |:help|. The 'helpfile' option can be set to the name of the help file, so you can put it in any place you like. ============================================================================== 2. Vim on the internet *internet* *www* *faq* *FAQ* *ftp* *distribution* *download* The Vim pages contain the most recent information about Vim. They also contains links to the most recent version of Vim. The FAQ is a list of Frequently Asked Questions, read this if you have problems. VIM home page: VIM FAQ: Usenet News group where Vim is discussed: *news* *usenet* comp.editors *vimdev* *mail_list* There are three mailing lists for Vim: For discussions about using existing versions of Vim: Useful mappings, questions, answers, where to get a specific version, etc. For discussions about changing Vim: New features, porting, etc. Announcements about new versions of Vim; also beta-test versions and ports to different systems. NOTE: - You can only send messages to these lists if you have subscribed! - You need to send the messages from the same location as where you subscribed from (yes, Majordomo is inflexible). - Maximum message size is 40000 characters. If you want to join, send a message to and put "info" in the body. Then Majordomo will give you a little help. An archive is kept at: And later at: Bug reports: *bugs* *bug-reports* Bram Moolenaar Please be brief; all the time that is spend on answering mail is subtracted from the time that is spent on improving Vim! Always give a reproducible example and try to find out which settings or other things influence the appearance of the bug. Try different machines, if possible. Send me patches if you can! In case of doubt, include the output of these commands: :version :!uname -a " Unix only :map :map! :au :set all :set termcap ============================================================================== 3. Credits *credits* *author* Most of Vim was written by Bram Moolenaar . Parts of the documentation come from several Vi manuals, written by: W.N. Joy Alan P.W. Hewett Mark Horton The Vim editor is based on Stevie and includes (ideas from) other software, worked on by the people mentioned here. Other people helped by sending me patches, suggestions and giving feedback about what is good and bad in Vim. Vim would never have become what it is now, whithout the help of these people! Tony Andrews Stevie Gert van Antwerpen changes for DJGPP on MS-DOS Berkeley DB(3) ideas for swap file implementation Keith Bostic Nvi Ralf Brown SPAWNO library for MS-DOS Robert Colon many useful remarks Kayhan Demirel sent me news in Uganda Chris & John Downey xvi (ideas for multi-windows version) Eric Fischer Mac port, 'cindent', and other improvements Bill Foster Athena GUI port Loic Grenie xvim (ideas for multi windows version) Steve Kirkendall Elvis Sergey Laskavy Vim's help from Moscow Avner Lottem Edit in right-to-left windows (RIGHTLEFT) George V. Reilly Win32 port Stephen Riehm bug collector Olaf Seibert DICE and BeBox version, regexp improvements Mortaza Shiran Farsi patches Peter da Silva termlib Paul Slootman OS/2 port Henry Spencer regular expressions Tim Thompson Stevie G. R. (Fred) Walter Stevie Sven Verdoolaege Perl interface Robert Webb Command-line completion, GUI version, and lots of patches Juergen Weigert Lattice version, AUX improvements, UNIX and MS-DOS ports, autoconf I wish to thank all the people that sent me bug reports and suggestions. The list is too long to mention them all here. Vim would not be the same without the ideas from all these people: They keep Vim alive! ============================================================================== 4. Notation *notation* [] Characters in square brackets are optional. *count* *[count]* [count] An optional number that may precede the command to multiply or iterate the command. If no number is given, a count of one is used, unless otherwise noted. Note that in this manual the [count] is not mentioned in the description of the command, but only in the explanation. This was done to make the commands easier to lookup. If the "sc" option is on (|'showcmd'|), the (partially) entered count is shown at the bottom of the window. You can use to erase the last digit (|N|). *[quotex]* ["x] An optional register designation where text can be stored. See |registers|. The x is a single character between 'a' and 'z' or 'A' and 'Z' or '"', and in some cases (with the put command) between '0' and '9', '%', '#', ':' or '.'. The uppercase and lower case letter designate the same register, but the lower case letter is used to overwrite the previous register contents, while the uppercase letter is used to append to the previous register contents. Without the ""x" or with """" the stored text is put into the unnamed register. *{}* {} Curly braces denote parts of the command which must appear, but which can take a number of different values. The differences between Vim and Vi are also given in curly braces (this will be clear from the context). *{motion}* {motion} A command that moves the cursor. See the list in chapter 6, |cursor_motions|. This is used after an operator command |operator| to move over the text that is to be operated upon. If the motion includes a count and the operator also had a count, the two counts are multiplied. For example: "2d3w" deletes six words. The motion can also be a mouse click. The mouse is currently only supported for MS-DOS, Win32 and xterm under Unix. *{Visual}* {Visual} A piece of text that is started with the "v", "V", or CTRL-V command and ended by the cursor position. This is used before an operator command |operator| to highlight the text that is to be operated upon. See the chapter on Visual mode |Visual_mode|. ** A special character from the table below or a single ASCII character. *'character'* 'character' A single ASCII character. ** A single character from the range to . For example: is a lowercase letter. Multiple ranges may be concatenated. For example, is any alphanumeric character. *CTRL-{char}* CTRL-{char} {char} typed as a control character; that is, typing {char} while holding the CTRL key down. The case of {char} does not matter; thus CTRL-A and CTRL-a are equivalent. But on some terminals, using the SHIFT key will produce another code, don't use it then. *'option'* 'option' An option, or parameter, that can be set to a value, is enclosed in single quotes. See chapter 19, |options|. *quotecommandquote* "command" In examples, the commands you can type are enclosed in double quotes. *key_notation* notation meaning equivalent decimal value(s) ----------------------------------------------------------------------- zero CTRL-@ 0 (stored as 10) ** backspace CTRL-H 8 *backspace* tab CTRL-I 9 *tab* *linefeed* linefeed CTRL-J 10 (used for ) formfeed CTRL-L 12 *formfeed* carriage return CTRL-M 13 *carriage_return* same as ** escape CTRL-[ 27 *escape* ** space 32 *space* delete 127 cursor-up *cursor-up* *cursor_up* cursor-down *cursor-down* *cursor_down* cursor-left *cursor-left* *cursor_left* cursor-right *cursor-right* *cursor_right* shift-cursor-up shift-cursor-down shift-cursor-left shift-cursor-right control-cursor-left control-cursor-right - function keys 1 to 12 *function_key* *function-key* - shift-function keys 1 to 12 ** help key undo key insert key home *home* end *end* page-up *page_up* *page-up* page-down *page_down* *page-down* keypad home (upper left) *keypad_home* keypad end (lower left) *keypad_end* keypad page-up (upper right) *keypad_page_up* keypad page-down (lower right) *keypad_page_down* shift-key *shift* control-key *control* *ctrl* alt-key or meta-key *meta* *alt* key with "xx" entry in termcap ----------------------------------------------------------------------- Note: The shifted cursor keys, the help key, and the undo key are only available on a few terminals. On the Amiga, shifted function key 10 produces a code (CSI) that is also used by key sequences. It will be recognized only after typing another key. Note: There are two codes for the delete key. 127 is the decimal ASCII value for the delete key, which is always recognized. Some delete keys send another value, in which case this value is obtained from the termcap entry "kD". Both values have the same effect. Also see |:fixdel|. Note: The keypad keys are used in the same way as the corresponding "normal" keys. For example, has the same effect as . If a keypad key sends the same raw key code as it non-keypad equivalent, it will be recognized as the non-keypad code. For example, when sends the same code as , when pressing Vim will think was pressed. Mapping will not work then. *<>* Some of the examples are given in the <> notation. The rules are: 1. Any printable characters are typed directly, except backslash and '<' 2. A backslash is represented with "\\", double backslash. 3. A real '<' is represented with "\<". 4. "" means the special key typed. This is the notation explained in the table above. A few examples: Escape key CTRL-G cursor up key Control- left mouse click Shifted function key 11 Meta- a ('a' with bit 8 set) Meta- A ('A' with bit 8 set) "kd" termcap entry (cursor down key) If you want to use the full <> notation in Vim, you have to remove the 'B' flag from 'cpoptions' and make sure the '<' flag is excluded (it already is by default). :set cpo=ceFs If you have the 'B' flag in 'cpoptions', then <> notation mostly still works, but you can't escape the special meaning of key names in <> with a backslash. To distinguish using <> with and without the 'B' flag, it's called full <> notation if the 'B' flag is excluded. For mapping, abbreviation and menu commands you can then copy-paste the examples and use them directly. Or type them literally, including the '<' and '>' characters. This does NOT work for other commands, like ":set" and ":autocmd"! There are several references to other versions of Vi: *Vi* Vi "the original". Without further remarks this is the version of Vi that appeared in Sun OS 4.x. ":version" returns "Version 3.7, 6/7/85". Sometimes other versions are referred to. Only runs under Unix. Source code only available with a license. *Posix* Posix From the IEEE standard 1003.2, Part 2: Shell and utilities. Generally known as "Posix". This is a textual description of how Vi is supposed to work. The version used is a draft from beginning 1996, so all remarks are "expected to comply to" this. Anything can change though... *Nvi* Nvi The "New" Vi. The version of Vi that comes with BSD 4.4 and many free Unix versions. The version used is 1.79. ":version" returns "Version 1.79 (10/23/96)". Source code is freely available. *Elvis* Elvis Another Vi clone, made by Steve Kirkendall. The version used is 2.1b, which is a beta-test version. Version 2.0 is the last official release. Source code is freely available. ============================================================================== 5. Modes, introduction *vim-modes-intro* *vim_modes* Vim has five BASIC modes: Normal mode In Normal mode you can enter all the editor commands. If you start the editor you are in this mode (unless you have set the 'insertmode' option, see below). This is also known as command mode. Visual mode This is like Normal mode, but the movement commands extend a highlighted area. When a non-movement command is used, it is executed for the highlighted area. See |Visual_mode|. Insert mode In Insert mode the text you type is inserted into the buffer. If the 'showmode' option is on (which is default), the string "-- INSERT --" is shown at the bottom of the window. |mode_ins_repl| Command-line mode In Command-line mode you can enter one line of text at the bottom of the window. This is for the Ex commands, ":", the pattern search commands, "?" and "/", and the filter command, "!". |mode_cmdline| Ex mode Like Command-line mode, but after entering a command you remain in Ex mode. Very limited editing of the command. |mode-Ex| There are two ADDITIONAL modes: Replace mode Replace mode is a special case of Insert mode. You can do the same things as in Insert mode, but for each character you enter, one character of the existing text is deleted. If the 'showmode' option is on, (which is the default), the string "-- REPLACE --" is shown at the bottom of the window. |replace_mode| Insert command mode Entered when CTRL-O given in Insert mode. This is like Normal mode, but after executing one command Vim returns to Insert mode. The string "-- (insert) --" is shown at the bottom of the window. ============================================================================== 6. Switching from mode to mode *mode_switching* If for any reason you do not know which mode you are in, you can always get back to Normal mode by typing twice. You will know you are back in Normal mode when you see the screen flash or hear the bell after you type . This doesn't work for Ex mode, use ":visual". *i_esc* TO mode Normal Visual Insert Replace Cmd-line Ex FROM mode Normal - v V ^V *1 R : / ? ! Q Visual *2 - c C -- : -- Insert -- - -- -- Replace -- - -- -- Command-line *3 -- -- -- - -- Ex :vi -- -- -- -- - - NA -- not possible *1 Go from Normal mode to Insert mode by giving the command "i", "I", "a", "A", "o", "O", "c", "C", "s" or S". *2 Go from Visual mode to Normal mode by giving a non-movement command, which causes the command to be executed, or by hitting "v", "V" or "CTRL-V" (see |v_v|), which just stops Visual mode without side effets. *3 Go from Command-line mode to Normal mode by: - Hitting or , which causes the entered command to be executed. - Deleting the complete line (e.g., with CTRL-U) and giving a final . - Hitting CTRL-C or , which quits the command line without executing the command. In the last case may be the character defined with the 'wildchar' option, in which case it will start command line completion. You can ignore that and type again. {Vi: when hitting the command line is executed. This is unexpected for most people; therefore it was changed in Vim. But when the is part of a mapping, the command line is executed. If you want the Vi behaviour also when typing , use ":cmap ^V ^V^M"} If the 'insertmode' option is on, editing a file will start in Insert mode. *Q* *mode-Ex* *ex-mode* Q Switch to "Ex" mode. This is a bit like typing ":" commands one after another, except: - You don't have to keep pressing ":". - The screen doesn't get updated after each command. - There is no normal command-line editing. - Mappings and abbreviations are not used. In fact, you are editing the lines with the "standard" line-input editing commands ( or to erease, CTRL-U to kill the whole line). Vim will enter this mode by default if it's invoked as "ex" on the command line. Use the ":vi" command |:visual| to exit "Ex" mode. ============================================================================== 7. The window contents *window_contents* In command and Insert/Replace mode the screen window will show the current contents of the buffer: What You See Is What You Get. There are two exceptions: - When the 'cpoptions' option contains '$', and the change is within one line, the text is not directly deleted, but a '$' is put at the last deleted character. - When inserting text in one window, other windows on the same text are not updated until the insert is finished. {Vi: The screen is not always updated on slow terminals} Lines longer than the window width will wrap, unless the 'wrap' option is off (see below). The 'linebreak' option can be set to wrap at a blank character. The bottom lines in the window may start with one of these two characters: '@' The next line is too long to fit in the window. '~' Below the last line in the buffer. If the bottom line is completely filled with '@', the line that is at the top of the window is too long to fit in the window. If the cursor is on this line you can't see what you are doing, because this part of the line is not shown. However, the part of the line before the '@'s can be edited normally. {Vi: gives an "internal error" on lines that do not fit in the window} The '@' occasion in the 'highlight' option can be used to set special highlighting for the '@' and '~' characters. The 'showbreak' option contains the string to put in front of wrapped lines. *wrap_off* If the 'wrap' option is off, long lines will not wrap. Only the part that fits on the screen is shown. If the cursor is moved to a part of the line that is not shown, the screen is scrolled horizontally. The advantage of this method is that columns are shown as they are and lines that cannot fit on the screen can be edited. The disadvantage is that you cannot see all the characters of a line at once. The 'sidescroll' option can be set to the minimal number of columns to scroll. {Vi: has no 'wrap' option} All normal ASCII characters are displayed directly on the screen. The is replaced with the number of spaces that it represents. Other non-printing characters are replaced with "^{char}", where {char} is the non-printing character with 64 added. Thus character 7 (bell) will be shown as "^G". Characters between 127 and 160 are replaced with "~{char}", where {char} is the character with 64 subtracted. These characters occupy more than one position on the screen. The cursor can only be positioned on the first one. If you set the 'number' option, all lines will be preceded with their number. Tip: If you don't like wrapping lines to mix with the line numbers, set the 'showbreak' option to eight spaces: ":set showbreak=\ \ \ \ \ \ \ \ " If you set the 'list' option, characters will not be shown as several spaces, but as "^I". A '$' will be placed at the end of the line, so you can find trailing blanks. In Command-line mode only the command line itself is shown correctly. The display of the buffer contents is updated as soon as you go back to Command mode. Some commands hand over the window to external commands (e.g., ":shell" and "="). After these commands are finished the window may be clobbered with output from the external command, so it needs to be redrawn. This is also the case if something is displayed on the status line that is longer than the width of the window. If you are expected to have a look at the screen before it is redrawn, you get this message: Press RETURN or enter command to continue After you type a key the screen will be redrawn and Vim continues. If you type , or nothing else happens. If you type any other key, it will be interpreted as (the start of) a new command. {Vi: only ":" commands are interpreted} The last line of the window is used for status and other messages. The status messages will only be used if an option is on: status message option default Unix default current mode 'showmode' on on command characters 'showcmd' on off cursor position 'ruler' off off The current mode is "-- INSERT --" or "-- REPLACE --", see |'showmode'|. The command characters are those that you typed but were not used yet. {Vi: does not show the characters you typed or the cursor position} If you have a slow terminal you can switch off the status messages to speed up editing: :set nosc noru nosm If there is an error, an error message will be shown for at least one second (in reverse video). {Vi: error messages may be overwritten with other messages before you have a chance to read them} Some commands show how many lines were affected. Above which threshold this happens can be controlled with the 'report' option (default 2). On the Amiga Vim will run in a CLI window. The name Vim and the full name of the current file name will be shown in the title bar. When the window is resized, Vim will automatically redraw the window. You may make the window as small as you like, but if it gets too small not a single line will fit in it. Make it at least 40 characters wide to be able to read most messages on the last line. On most Unix systems window resize works ok. {Vi: not ok} vim:ts=8:sw=8:tw=78: