*helphelp.txt*	Nvim


		  VIM REFERENCE MANUAL	  by Bram Moolenaar


Help on help files					*helphelp*

                                      Type |gO| to see the table of contents.

==============================================================================
Help tag conventions					*help-context*

Get specific help:  It is possible to go directly to whatever you want help
on, by giving an argument to the |:help| command. Prepend something to specify
the context: >

	  WHAT			PREPEND    EXAMPLE
      Normal mode command		   :help x
      Visual mode command	  v_	   :help v_u
      Insert mode command	  i_	   :help i_<Esc>
      Command-line command	  :	   :help :quit
      Command-line editing	  c_	   :help c_<Del>
      Vim command argument	  -	   :help -r
      Option			  '	   :help 'textwidth'
      Regular expression	  /	   :help /[

See |help-summary| for more contexts and an explanation.
See |notation| for an explanation of the help syntax.

SEARCH FOR HELP

Type ":help word", then hit CTRL-D to see matching help entries for "word". Or
use ":helpgrep word". |:helpgrep|

==============================================================================
Notation						*notation*

When syntax highlighting is used to read this, text that is not typed
literally is often highlighted with the Special group.  These are items in [],
{} and <>, and CTRL-X.

Note that Vim uses all possible characters in commands.  Sometimes the [], {}
and <> are part of what you type, the context should make this clear.


- []            Characters in square brackets are optional.

                                                    *count* *[count]*
- [count]       An optional number that may precede the command to multiply
                or iterate the command.  If no number is given, a count of one
                is used, unless otherwise noted.  Note that in this manual the
                [count] is not mentioned in the description of the command,
                but only in the explanation.  This was done to make the
                commands easier to look up.  If the 'showcmd' option is on,
                the (partially) entered count is shown at the bottom of the
                window.  You can use <Del> to erase the last digit (|N<Del>|).

                                                        *[quotex]*
- ["x]          An optional register designation where text can be stored.
                See |registers|.  The x is a single character between 'a' and
                'z' or 'A' and 'Z' or '"', and in some cases (with the put
                command) between '0' and '9', '%', '#', or others.  The
                uppercase and lowercase letter designate the same register,
                but the lowercase letter is used to overwrite the previous
                register contents, while the uppercase letter is used to
                append to the previous register contents.  Without the ""x" or
                with """" the stored text is put into the unnamed register.

                                                        *{}*
- {}            Curly braces denote parts of the command which must appear,
                but which can take a number of different values.  The
                differences between Vim and Vi are also given in curly braces
                (this will be clear from the context).

                                                        *{char1-char2}*
- {char1-char2} A single character from the range char1 to char2.  For
                example: {a-z} is a lowercase letter.  Multiple ranges may be
                concatenated.  For example, {a-zA-Z0-9} is any alphanumeric
                character.

                                                *{motion}* *movement*
- {motion}      A command that moves the cursor.  These are explained in
                |motion.txt|.
                - Examples:
                  - `w`           to start of next word
                  - `b`           to begin of current word
                  - `4j`          four lines down
                  - `/The<CR>`    to next occurrence of "The"
                - This is used after an |operator| command to move over the
                  text that is to be operated upon.
                  - If the motion includes a count and the operator also has
                    a count, the two counts are multiplied.  For example:
                    "2d3w" deletes six words.
                  - The motion can be backwards, e.g. "db" to delete to the
                    start of the word.
                  - The motion can also be a mouse click.  The mouse is not
                    supported in every terminal though.
                  - The ":omap" command can be used to map characters while an
                    operator is pending.
                  - Ex commands can be used to move the cursor.  This can be
                    used to call a function that does some complicated motion.
                    The motion is always charwise exclusive, no matter what
                    ":" command is used.  This means it's impossible to
                    include the last character of a line without the line
                    break (unless 'virtualedit' is set). If the Ex command
                    changes the text before where the operator starts or jumps
                    to another buffer the result is unpredictable.  It is
                    possible to change the text further down.  Jumping to
                    another buffer is possible if the current buffer is not
                    unloaded.

                                                        *{Visual}*
- {Visual}      A selected text area.  It is started with the "v", "V", or
                CTRL-V command, then any cursor movement command can be used
                to change the end of the selected text.
                This is used before an |operator| command to highlight the
                text that is to be operated upon.
                See |Visual-mode|.

                                                        *<character>*
- <character>   A special character from the table below, optionally with
                modifiers, or a single ASCII character with modifiers.

                                                        *'character'*
- 'c'           A single ASCII character.

                                                        *CTRL-{char}*
- CTRL-{char}   {char} typed as a control character; that is, typing {char}
                while holding the CTRL key down.  The case of {char} is
                ignored; thus CTRL-A and CTRL-a are equivalent.  But in
                some terminals and environments, using the SHIFT key will
                produce a distinct code (e.g. CTRL-SHIFT-a); in these
                environments using the SHIFT key will not trigger commands
                such as CTRL-A.

                                                        *'option'*
- 'option'      An option, or parameter, that can be set to a value, is
                enclosed in single quotes.  See |options|.

                                                        *quotecommandquote*
- "command"     A reference to a command that you can type is enclosed in
                double quotes.
- `command`     New style command, this distinguishes it from other quoted
                text and strings.

==============================================================================
Help commands						*online-help*

			*help* *<Help>* *:h* *:help* *<F1>* *i_<F1>* *i_<Help>*
<Help>		or
:h[elp]			Open a window and display the help file in read-only
			mode.  If there is a help window open already, use
			that one.  Otherwise, if the current window uses the
			full width of the screen or is at least 80 characters
			wide, the help window will appear just above the
			current window.  Otherwise the new window is put at
			the very top.
			The 'helplang' option is used to select a language, if
			the main help file is available in several languages.

			Type |gO| to see the table of contents.

							*:help!*
:h[elp]!		Guesses a help tag from the |WORD| at cursor, in DWIM ("Do
			What I Mean") fashion: trims punctuation using various
			heuristics until a valid help tag is found.

			For example, move the cursor anywhere in this code,
			then run `:help!`: >

				local v = vim.version.parse(vim.system({'foo'}):wait().stdout)
<
			Then compare to `:exe 'help' expand('<cword>')`.

						*{subject}* *E149* *E661*
:h[elp] {subject}	Like ":help", additionally jump to the tag {subject}.
			For example:  >
				:help options

<			{subject} can include wildcards such as "*", "?" and
			"[a-z]":
			   :help z?	jump to help for any "z" command
			   :help z.	jump to the help for "z."
			But when a tag exists it is taken literally:
			   :help :?	jump to help for ":?"

			If there is no full match for the pattern, or there
			are several matches, the "best" match will be used.
			A sophisticated algorithm is used to decide which
			match is better than another one.  These items are
			considered in the computation:
			- A match with same case is much better than a match
			  with different case.
			- A match that starts after a non-alphanumeric
			  character is better than a match in the middle of a
			  word.
			- A match at or near the beginning of the tag is
			  better than a match further on.
			- The more alphanumeric characters match, the better.
			- The shorter the length of the match, the better.

			The 'helplang' option is used to select a language, if
			the {subject} is available in several languages.
			To find a tag in a specific language, append "@ab",
			where "ab" is the two-letter language code.  See
			|help-translated|.

			Note that the longer the {subject} you give, the less
			matches will be found.  You can get an idea how this
			all works by using commandline completion (type CTRL-D
			after ":help subject" |c_CTRL-D|).
			If there are several matches, you can have them listed
			by hitting CTRL-D.  Example: >
				:help cont<Ctrl-D>

<			Instead of typing ":help CTRL-V" to search for help
			for CTRL-V you can type: >
				:help ^V
<			This also works together with other characters, for
			example to find help for CTRL-V in Insert mode: >
				:help i^V
<
			It is also possible to first do ":help" and then
			use ":tag {pattern}" in the help window.  The
			":tnext" command can then be used to jump to other
			matches, "tselect" to list matches and choose one. >
				:help index
				:tselect /.*mode

<			When there is no argument you will see matches for
			"help", to avoid listing all possible matches (that
			would be very slow).
			The number of matches displayed is limited to 300.

			The `:help` command can be followed by '|' and another
			command, but you don't need to escape the '|' inside a
			help command.  So these both work: >
				:help |
				:help k| only
<			Note that a space before the '|' is seen as part of
			the ":help" argument.
			You can also use <NL> or <CR> to separate the help
			command from a following command.  You need to type
			CTRL-V first to insert the <NL> or <CR>.  Example: >
				:help so<C-V><CR>only
<

:h[elp]! {subject}	Like ":help", but prefers tags with the same
			|help-translated| language as the current file.

			Unrelated to |:help!| (no {subject}).

							*:helpc* *:helpclose*
:helpc[lose]		Close one help window, if there is one.
			Vim will try to restore the window layout (including
			cursor position) to the same layout it was before
			opening the help window initially.  This might cause
			triggering several autocommands.

							*:helpg* *:helpgrep*
:helpg[rep] {pattern}[@xx]
			Search all help text files and make a list of lines
			in which {pattern} matches.  Jumps to the first match.
			The optional [@xx] specifies that only matches in the
			"xx" language are to be found.
			You can navigate through the matches with the
			|quickfix| commands, e.g., |:cnext| to jump to the
			next one.  Or use |:cwindow| to get the list of
			matches in the quickfix window.
			{pattern} is used as a Vim regexp |pattern|.
			'ignorecase' is not used, add "\c" to ignore case.
			Example for case sensitive search: >
				:helpgrep Uganda
<			Example for case ignoring search: >
				:helpgrep uganda\c
<			Example for searching in French help: >
				:helpgrep backspace@fr
<			The pattern does not support line breaks, it must
			match within one line.  You can use |:grep| instead,
			but then you need to get the list of help files in a
			complicated way.
			Cannot be followed by another command, everything is
			used as part of the pattern.  But you can use
			|:execute| when needed.
			Compressed help files will not be searched (Fedora
			compresses the help files).

							*:lh* *:lhelpgrep*
:lh[elpgrep] {pattern}[@xx]
			Same as ":helpgrep", except the location list is used
			instead of the quickfix list.  If the help window is
			already opened, then the location list for that window
			is used.  Otherwise, a new help window is opened and
			the location list for that window is set.  The
			location list for the current window is not changed
			then.

							*:exu* *:exusage*
:exu[sage]		Show help on Ex commands.  Added to simulate the Nvi
			command.

							*:viu* *:viusage*
:viu[sage]		Show help on Normal mode commands.  Added to simulate
			the Nvi command.

When no argument is given to |:help| the file given with the 'helpfile' option
will be opened.  Otherwise the specified tag is searched for in all "doc/tags"
files in the directories specified in the 'runtimepath' option.

If you would like to open the help in the current window, see this tip:
|help-curwin|.

The initial height of the help window can be set with the 'helpheight' option
(default 20).
						*help-buffer-options*
When the help buffer is created, several local options are set to make sure
the help text is displayed as it was intended:
    'iskeyword'		nearly all ASCII chars except ' ', "*", '"' and '|'
    'foldmethod'	"manual"
    'tabstop'		8
    'arabic'		off
    'binary'		off
    'buflisted'		off
    'cursorbind'	off
    'diff'		off
    'foldenable'	off
    'list'		off
    'modifiable'	off
    'number'		off
    'relativenumber'	off
    'rightleft'		off
    'scrollbind'	off
    'spell'		off

Jump to specific subjects by using tags.  This can be done in two ways:
- Use the "CTRL-]" command while standing on the name of a command or option.
  This only works when the tag is a keyword.  "<C-Leftmouse>" and
  "g<LeftMouse>" work just like "CTRL-]".
- use the ":ta {subject}" command.  This also works with non-keyword
  characters.

Use CTRL-T or CTRL-O to jump back.
Use ":q" to close the help window.
Use `g==` to execute the current Lua/Vimscript code block.

If there are several matches for an item you are looking for, this is how you
can jump to each one of them:
1. Open a help window
2. Use the ":tag" command with a slash prepended to the tag.  E.g.: >
	:tag /min
3. Use ":tnext" to jump to the next matching tag.

It is possible to add help files for plugins and other items.  You don't need
to change the distributed help files for that.  See |add-local-help|.

To write a local help file, see |write-local-help|.

Note that the title lines from the local help files are automagically added to
the "LOCAL ADDITIONS" section in the "help.txt" help file |local-additions|.
This is done when viewing the file in Vim, the file itself is not changed.  It
is done by going through all help files and obtaining the first line of each
file.  The files in $VIMRUNTIME/doc are skipped.

					*:helpt* *:helptags*
			*E150* *E151* *E152* *E153* *E154* *E670* *E856*
:helpt[ags] [++t] {dir}
			Generate the help tags file(s) for directory {dir}.
			When {dir} is ALL then all "doc" directories in
			'runtimepath' will be used.

			All "*.txt" and "*.??x" files in the directory and
			sub-directories are scanned for a help tag definition
			in between stars.  The "*.??x" files are for
			translated docs, they generate the "tags-??" file, see
			|help-translated|.  The generated tags files are
			sorted.
			When there are duplicates an error message is given.
			An existing tags file is silently overwritten.

			The optional "++t" argument forces adding the
			"help-tags" tag.  This is also done when the {dir} is
			equal to $VIMRUNTIME/doc.

			To rebuild the help tags in the runtime directory
			(requires write permission there): >
				:helptags $VIMRUNTIME/doc
<


==============================================================================
Translated help files					*help-translated*

It is possible to add translated help files, next to the original English help
files.  Vim will search for all help in "doc" directories in 'runtimepath'.

At this moment translations are available for:
	Chinese  - multiple authors
	French   - translated by David Blanchet
	Italian  - translated by Antonio Colombo
	Japanese - multiple authors
	Polish   - translated by Mikolaj Machowski
	Russian  - translated by Vassily Ragosin
See the Vim website to find them: https://www.vim.org/translations.php

A set of translated help files consists of these files:

	help.abx
	howto.abx
	...
	tags-ab

"ab" is the two-letter language code.  Thus for Italian the names are:

	help.itx
	howto.itx
	...
	tags-it

The 'helplang' option can be set to the preferred language(s).  The default is
set according to the environment.  Vim will first try to find a matching tag
in the preferred language(s).  English is used when it cannot be found.

To find a tag in a specific language, append "@ab" to a tag, where "ab" is the
two-letter language code.  Example: >
	:he user-manual@it
	:he user-manual@en
The first one finds the Italian user manual, even when 'helplang' is empty.
The second one finds the English user manual, even when 'helplang' is set to
"it".

When using command-line completion for the ":help" command, the "@en"
extension is only shown when a tag exists for multiple languages.  When the
tag only exists for English "@en" is omitted.  When the first candidate has an
"@ab" extension and it matches the first language in 'helplang' "@ab" is also
omitted.

When using |CTRL-]| or ":help!" in a non-English help file Vim will try to
find the tag in the same language.  If not found then 'helplang' will be used
to select a language.

Help files must use latin1 or utf-8 encoding.  Vim assumes the encoding is
utf-8 when finding non-ASCII characters in the first line.  Thus you must
translate the header with "For Vim version".

The same encoding must be used for the help files of one language in one
directory.  You can use a different encoding for different languages and use
a different encoding for help files of the same language but in a different
directory.

Hints for translators:
- Do not translate the tags.  This makes it possible to use 'helplang' to
  specify the preferred language.  You may add new tags in your language.
- When you do not translate a part of a file, add tags to the English version,
  using the "tag@en" notation.
- Make a package with all the files and the tags file available for download.
  Users can drop it in one of the "doc" directories and start use it.
  Report to the development team, so they can add a link on www.vim.org.
- Use the |:helptags| command to generate the tags files.  It will find all
  languages in the specified directory.

==============================================================================
Writing help files					*help-writing*

For ease of use, a Vim help file for a plugin should follow the format of the
standard Vim help files, except for the first line.  If you are writing a new
help file it's best to copy one of the existing files and use it as a
template.

The first line in a help file should have the following format: >

	*plugin_name.txt*	{short description of the plugin}

The first field is a help tag where ":help plugin_name" will jump to.  The
remainder of the line, after a Tab, describes the plugin purpose in a short
way.  This will show up in the "LOCAL ADDITIONS" section of the main help
file.  Check there that it shows up properly: |local-additions|.

If you want to add a version number or last modification date, put it in the
second line, right aligned.

At the bottom of the help file, place a Vim modeline to set the 'textwidth'
and 'tabstop' options and the 'filetype' to "help".  Never set a global option
in such a modeline, that can have undesired consequences.


TAGS

To define a help tag, place the name between asterisks ("*tag-name*").  The
tag-name should be different from all the Vim help tag names and ideally
should begin with the name of the Vim plugin.  The tag name is usually right
aligned on a line.

When referring to an existing help tag and to create a hot-link, place the
name between two bars ("|") eg. |help-writing|.

When referring to a Vim option in the help file, place the option name between
two single quotes, eg. 'statusline'

When referring to any other technical term or symbol, such as a filename or
function parameter, surround it in backticks, eg. `~/.path/to/init.vim`. This
renders it as "inline" code (as opposed to a "codeblock" |help-codeblock|).


HIGHLIGHTING

To define a column heading, use a tilde character at the end of the line,
preceded by a space. This will highlight the column heading in a different
color.  E.g.

Column heading ~

To separate sections in a help file, place a series of '=' characters in a
line starting from the first column.  The section separator line is
highlighted differently.

							      *help-codeblock*
To quote a block of ex-commands verbatim, place a greater than (>) character
at the end of the line before the block and a less than (<) character as the
first non-blank on a line following the block.  Any line starting in column 1
also implicitly stops the block of ex-commands before it.  E.g. >
	function Example_Func()
	  echo "Example"
	endfunction
<
To enable syntax highlighting for a block of code, place a language name
annotation (e.g. "vim") after a greater than (>) character.  E.g. >vim
	function Example_Func()
	  echo "Example"
	endfunction
<
						*help-notation*
The following are highlighted differently in a Vim help file:
  - a special key name expressed either in <> notation as in <PageDown>, or
    as a Ctrl character as in CTRL-X
  - anything between {braces}, e.g. {lhs} and {rhs}

The word "Note", "Notes" and similar automagically receive distinctive
highlighting.  So do these:
	Todo	something to do
	Error	something wrong

You can find the details in $VIMRUNTIME/syntax/help.vim


FILETYPE COMPLETION					*ft-help-omni*

To get completion for help tags when writing a tag reference, you can use the
|i_CTRL-X_CTRL-O| command.


 vim:tw=78:ts=8:noet:ft=help:norl:
