# Reproducing Montlake Eastside Seattle, US

#### Robin Lovelace, Trevor Nederlof and Nathanael Sheehan

## Introduction

Lets start with the city A/B street began, Seattle. U.S. The seaport city is home to over 700,000 people, including A/B Street creator, Dustin Carlino, who has been developing tools to empirically study the impact of small changes within the road network: this means “you can transform that street parking into a bus lane or fix that pesky left turn at a traffic signal, measure the effects, then propose actually making the change”. For the past two years, Seattle has been a key are of study within the A/B street simuverse and thus makes it a great starting point in understanding the utilities of `abstr` to generate site data for A/B street.

## Example

This example demonstrates how to wrangle the data for the three key components needsed to generate scenarios for A/B street. These components are: OD data, site zones and site buildings. With these components, the `abstr` package is ready to convert dataframes into simulations! The kinds of data processing steps demonstrated in this vignette could be applied to generate ‘scenario.json’ files for other cities, and represent a reproducibility challenge: can you reproduce the results shown in the final .json file at the end of the vignette?

Lets get started.

### Load packages

    library(tidyverse)
    library(sf)
    library(abstr)

### Fetch Montlake Polygon

Now lets start with fetching the polygon area for Montlake. To be consistent with whats on A/B street currently, we can grab the official polygon from the github repo. Following this we can clean the data and convert it to WGS84.

    montlake_poly_url = "https://github.com/a-b-street/abstreet/raw/refs/heads/main/importer/config/us/seattle/montlake.geojson"
    boundary_sf_poly = sf::read_sf(montlake_poly_url)

### Parsing zones

Next, we fetch zone data for the Seattle district, this comes from soundcast and needs to be parsed based on our polygon boundary.

    all_zones_tbl = sf::st_read("https://raw.githubusercontent.com/psrc/soundcast/master/inputs/base_year/taz2010.geojson") %>% sf::st_transform(4326)
    zones_in_boundary_tbl = all_zones_tbl[sf::st_intersects(all_zones_tbl, boundary_sf_poly, sparse = F),]

### Generate OD Matrix and zones table

Now we need to get some OD data into the mix. Finding this data for some cities can be tricky, luckily soundcast provides granular data for trips in Seattle for 2014. This data is then converted to an OD matrix and is filtered by trips that start or finish in Montlake zones. Furthermore, the data is then transformed into a wide format and filtered to only include OD entries with greater than 25 trips. Voila, the OD data is ready to go. The OD data is then parsed against all zones in the montlake area.

    ## process the disagreggated soundcast trips data
    all_trips_tbl = readr::read_csv("http://abstreet.s3-website.us-east-2.amazonaws.com/dev/data/input/us/seattle/trips_2014.csv.gz")

    ## create a OD matrix
    od_tbl_long = dplyr::select(all_trips_tbl, otaz, dtaz, mode) %>%
      dplyr::mutate(mode = dplyr::case_when(mode %in% c(1, 9) ~ "Walk",
                                            mode == 2 ~ "Bike",
                                            mode %in% c(3, 4, 5) ~ "Drive",
                                            mode %in% c(6, 7, 8) ~ "Transit",
                                            TRUE ~ as.character(NA))) %>%
      dplyr::filter(!is.na(mode)) %>%
      dplyr::group_by(otaz, dtaz, mode) %>%
      dplyr::summarize(n = n()) %>%
      dplyr::ungroup() %>%
      # only keep an entry if the origin or destination is in a Montlake zone
      dplyr::filter((otaz %in% zones_in_boundary_tbl$TAZ) | (dtaz %in% zones_in_boundary_tbl$TAZ))

    # create a wide OD matrix and filter out any OD entries with under 25 trips in it
    montlake_od_tbl = tidyr::pivot_wider(od_tbl_long, names_from = mode, values_from = n, values_fill = 0) %>%
      dplyr::rename(o_id = otaz, d_id = dtaz) %>%
      dplyr::mutate(total = Drive + Transit + Bike + Walk) %>%
      dplyr::filter(total >= 25) %>%
      dplyr::select(-total)

    montlake_zone_tbl = dplyr::right_join(all_zones_tbl,
                                           tibble::tibble("TAZ" = unique(c(montlake_od_tbl$o_id, montlake_od_tbl$d_id))),
                                           by = "TAZ") %>%
      dplyr::select(TAZ) %>%
      dplyr::rename(id = TAZ)

### Fetching OSM building data

A/B street functions by generating buildings based on OSM entries, luckily the `osmextract` makes this an easy process in R. OSM buildings must be valid `sf` objects so that they can be parsed against the zone areas. To speed things up, the later part of this chunk selects 20% of buildings in each zone.

    osm_polygons = osmextract::oe_read("http://download.geofabrik.de/north-america/us/washington-latest.osm.pbf", layer = "multipolygons")

    building_types = c("yes", "house", "detached", "residential", "apartments",
                        "commercial", "retail", "school", "industrial", "semidetached_house",
                        "church", "hangar", "mobile_home", "warehouse", "office",
                        "college", "university", "public", "garages", "cabin", "hospital",
                        "dormitory", "hotel", "service", "parking", "manufactured",
                        "civic", "farm", "manufacturing", "floating_home", "government",
                        "bungalow", "transportation", "motel", "manufacture", "kindergarten",
                        "house_boat", "sports_centre")
    osm_buildings = osm_polygons %>%
      dplyr::filter(building %in% building_types) %>%
      dplyr::select(osm_way_id, name, building)

    osm_buildings_valid = osm_buildings[sf::st_is_valid(osm_buildings),]

    montlake_osm_buildings_all = osm_buildings_valid[montlake_zone_tbl,]

    # # use to visualize the building data
    # tmap::tm_shape(boundary_sf_poly) + tmap::tm_borders() +
    #   tmap::tm_shape(montlake_osm_buildings) + tmap::tm_polygons(col = "building")

    # Filter down large objects for package -----------------------------------
    montlake_osm_buildings_all_joined = montlake_osm_buildings_all %>%
      sf::st_join(montlake_zone_tbl)

    set.seed(2021)
    # select 20% of buildings in each zone to reduce file size for this example
    # remove this filter or increase the sampling to include more buildings
    montlake_osm_buildings_sample = montlake_osm_buildings_all_joined %>%
      dplyr::filter(!is.na(osm_way_id)) %>%
      sf::st_drop_geometry() %>%
      dplyr::group_by(id) %>%
      dplyr::sample_frac(0.20) %>%
      dplyr::ungroup()

    montlake_osm_buildings_tbl = montlake_osm_buildings_all %>%
      dplyr::filter(osm_way_id %in% montlake_osm_buildings_sample$osm_way_id)

### Generate A/B Street scenarios using `abstr`

So now we are ready to generate simulation files. To do this, lets combine each of the elements outlined above, the zone (`montlake_zone_tbl`), building (`montlake_osm_buildings_tbl`) and OD (`montlake_od_tbl`) data. We do this using the ab_scenario() function in the abstr package, which generates a data frame representing travel between the montlake_buildings. While the OD data contains information on origin and destination zone, ab_scenario() ‘disaggregates’ the data and randomly selects building within each origin and destination zone to simulate travel at the individual level, as illustrated in the chunk below which uses only a sample of the montlake_od data, showing travel between three pairs of zones, to illustrate the process:

    # use subset of OD data for speed
    set.seed(42)
    montlake_od_minimal = montlake_od_tbl[sample(nrow(montlake_od_tbl), size = 3), ]

    output_sf = ab_scenario(
      od = montlake_od_minimal,
      zones = montlake_zone_tbl,
      zones_d = NULL,
      origin_buildings = montlake_osm_buildings_tbl,
      destination_buildings = montlake_osm_buildings_tbl,
      # destinations2 = NULL,
      pop_var = 3,
      time_fun = ab_time_normal,
      output = "sf",
      modes = c("Walk", "Bike", "Drive", "Transit"))

    # # visualize the results
    # tmap::tm_shape(res) + tmap::tm_lines(col="mode") +
    #   tmap::tm_shape(montlake_zone_tbl) + tmap::tm_borders()

    # build json output
    ab_save(ab_json(output_sf, time_fun = ab_time_normal,
                    scenario_name = "Montlake Example"),
            f = "montlake.json")

Let’s see what is in the file:

    file.edit("montlake.json")

The first trip schedule should look something like this, matching A/B Street’s schema.

    {
      "scenario_name": "Montlake Example",
      "people": [
        {
          "trips": [
            {
              "departure": 317760000,
              "origin": {
                "Position": {
                  "longitude": -122.3139,
                  "latitude": 47.667
                }
              },
              "destination": {
                "Position": {
                  "longitude": -122.3187,
                  "latitude": 47.6484
                }
              },
              "mode": "Walk",
              "purpose": "Shopping"
            }
          ]
        }

### Importing scenario files into A/B Street

After generating a `montlake_scenario.json`, you can import and simulate it as follows.

1. Run A/B Street, and choose “Sandbox” on the title screen.
2. If necessary, change the map to the Montlake district of Seattle, or whichever map your JSON scenario covers.
3. Change the scenario from the default “weekday” pattern. Choose “import JSON scenario,” then select your `montlake_scenario.json` file.

After you successfully import this file once, it will be available in the list of scenarios, under the “Montlake Example” name, or whatever `name` specified by the JSON file.